1996 honda accord lx 2.2l automatic k24a2 swap

[Kiseki_Shiro]

Hello very new to this stuff but i currently have a 2006 tsx and a 1996 honda accord both autos, and was wondering what ecu would i need to put in my 1996 honda accord for it to run the k24a2 out of the tsx, also what to keep it automatic.

 

[BrutalB83]

Can you fabricate? I know they have mounts to put K-series in this chassis, but I don't think they have mounts for auto transmission. Would need to be fabricated. Not sure on the ECU, but would likely need one of the K-series ECU's that can accept K-Pro, and then it would need to be tuned and you'd probably need to have someone who knows what they're doing help you modify the wire harness.

 

[dilbeckskate]

With it being automatic honestly more than it is worth. The TSX being a later OBD2 has many modules and canbus items it needs to run. You CAN manual convert it and get K-Swap mounts for the accord though for the swap to go in and use that motor. There is essentially 0 support for the automatic stuff (different ecu and trans ecu) , Soo if you can get the mounts for it and axles etc and put EVERYTHING it needs to run/not freak out module wise can probably do it but again then youd just still not have an insane amt more of power

 

[Kiseki_Shiro]

Can you fabricate? I know they have mounts to put K-series in this chassis, but I don't think they have mounts for auto transmission. Would need to be fabricated. Not sure on the ECU, but would likely need one of the K-series ECU's that can accept K-Pro, and then it would need to be tuned and you'd probably need to have someone who knows what they're doing help you modify the wire harness.

Yea I got A Mechanic friend who works at a dealership who knows how to mess with K & J Series wire harnesses, with the ecu I'm looking into a 05 accord ecu and ktuner it to be compatible with my dbc setup, with the mounts I figured i would have to fabricate mounts