2014 Veloster Turbo

We may earn a small commission from affiliate links and paid advertisements. Terms

10BFBAB0-4287-444A-A684-B02CB9D6ECE9.jpeg
 
I had a crunching noise while reversing hoping it hasn’t the bearings turned out to be the pads so bam done. Slammed both sides in with pin grease and new sliders.

Also the garage got cleaned up there was a lot of debris everywhere from moving the junk Kia parts around now they are gone.

1D7D13DC-A8D9-4B78-A339-6F1C53013445.jpeg 99005C85-06E2-49B1-8D9A-0C5C702BE511.jpeg 3966D163-8C27-4E3C-B3E5-9F542218C452.jpeg
 
The pictures that load when I try to view those attachments are hilarious.
One is a picture of a dog humping Vick with the caption that every dog has it's day.

What did the stealership ever say about the rust on the door?

Rotor looks moderately trashed, any reason you didn't change the rotors as well? No vibration from them?
 
lol yeah on the photos...

they are going to replace the door i just have to bring it in.

rotors are fine for another set of pads most of what you see has already cleaned up. i'll replace em next time. its a side effect of getting things hot. too hot.
 
So I’ve owned this bad boy for 6 years.

109k

overall great car with many many more smiles per hour. Love the remote start and to this day gapping new civics with my stockish car.

going to get it Tork tuned this year with their plug-in setup (Like a Cobb). Stage 0 cleanup Tune and full throttle launch lol. Should be good for about 20 hp/tq atw. But better drive ability and mileage. Not that I’m currently complaining though.
 
Rehabbed brakes and rotated tires. Hoping to do new front calipers and pads next month. Mine are so beat from the heat even with good maintenance. The inner seals are cracking. Time to replace them and rebuilt the originals.

also found one of my rear shocks is leaking and a fun pic of what is currrntly holding my front bumper up :)

4C8894E0-9944-4B34-A68F-256447D63AD3.jpeg
F19DACFD-80D9-414A-B8DE-72E7F169D209.jpeg
28F5F80C-A264-4A2F-92E1-AF810E1BC0B5.jpeg
 
my bumper headlight brackets were broken both sides so I drilled everything out and hair and used longer screws and epoxy. They are solid now.
6E1F15C3-DA05-4753-9420-2C0A1A892326.jpeg
CF4D7955-A984-4AC3-A4CB-4C04C2D28F3A.jpeg
 
Nice JBWelding, I may have to do that to the Civic's rear bumper at some point, but I'm afraid it'd look too nice.
 
Back
Top