Honda_Motor_Co.
Senior Member
![Notworthy :worthy: :worthy:](/styles/default/xenforo/smilies/notworthy.gif)
i got a 2.2L displacement setup which mean i have to have an 87mm bore
this b18c1 is going to be boosted. How much boost can i run? and how thick is this sleeve?
We may earn a small commission from affiliate links and paid advertisements. Terms
Originally posted by Honda_Motor_Co.@Nov 10 2003, 04:41 PM
alright then i wont worry if golden eagle sleeves are suppose to be #1
i wont worry about breaking my engine if it dose break im gonna save up to get darts honda gsr block ill have it bored out to 84 mm
![]()
Originally posted by Blanco+Nov 10 2003, 08:35 PM-->Honda_Motor_Co.@Nov 10 2003, 07:17 PM
:roll:BAD NEWS Golden eagle just emailed me and said do not assemble and start that engine the Bore is too big for turbo. For turbo should go no bigger then 85.5mm and with 87mm head gasket will not have enough room to seal.
So i just Lost a SHit Load of money i have to get rid of the crank and i have to buy new sleeves and crank to fit an 85 mm bore. :unsure:
Well, at least you didn't find out by blowing the engine up, first. Just sell what you can't use and buy what you can.