B16a2 Turbo Size

We may earn a small commission from affiliate links and paid advertisements. Terms

JDcompman

Junior Member
Ok, this is what I'm building have. B16a2 with b16a2 head and b18c1 tranny. Honed cylinders and ross racing pistons with cr of 9.0, Hondata on a p28. This is all going in a 94 civic dx. Please let me know if you need ne more info but i would really like to know what turbo size to get for this engine/car. I wanna run between 10 and 20psi if possible. Thanks <_<
 
What is your power goal? I dont see stock sleeves holding 20psi from a decent turbo very long. 1000$ USD for new sleeves installed by Golden Eagle Manf.

IMO.. i think acouple of good turbos for the b16a2 is the t3/60-1 and the t3/t4. If its more of a track car, a t4/60-1 wouldnt be a bad choice. I dont know much on turbo's, but t3/t4 is most common b/c its became a "fad"..

What is your goal for power? What kind of use will this car see? Autox or drag?
 
Id go with a t3/t04e, 57 trim, .63 turbine. they can be found at cheapturbo.com for around 550...if you dont mind a little more lag but more power potential, there is always the 60-1 :)
 
turbonetics turbos are 2002.

hello and welcome to 2003 :)

http://precisionte.com

SC50-425hp
SC32-480hp
SC34-545hp
SC44-565hp
SC60-580hp
SC51-585hp
SC52-600hp
SC53-610hp
SC54-620hp
 
Back
Top