Hey everyone, Im sure youve been asked this plenty of times before, but...
Im putting a 91' B18A into my 91' Crx Si ...
I have the Full motor, tranny, all bolt ons, ECU, Integra Axles and Linkage,and my si harness...
Now, I have had this motor for 3 months... When I got into it, I didnt do my damn research, and, from the idiots I talked to, I thought that it would 'Just drop In', haha!
Anyways, I FINALLY got the $ today to go out and get the mounts I need...
I have the LS linkage, So i can cut that myself and that will be taken care of...
So, I do still have a feq un-answered questions left, and I need to figure em out...
One, The MAP sensor ( firewall mounted )... Do I use the stock SI map sensor? Will the engine run poorly/oddly ? Err, will it affect it at all? If so, what do I do? I basically want this motor to run smoooth, because this IS my everyday driver ( and yes, Ive been out of a car for 3 months, lol ) and im fresh out of $...
So, If anyone knows about the whole MAP sensor thing, that would help alot...
The other thing is, I was told to take the spacers off of the Axles... What spacers?? Lol
I even had a friend online circle where they were in a picture of an axle, I looked.... Dont see anything I can pop off...
And Anooooottthhheeerrr thing.... The LS motor... I noticed that there were a few thin steel lines mounted on top of the intake manifold, and I cant seem to find where they go... Anyone got any input on that?
Oh, and..... ( lol ) What throttle cable do i need? I heard that the Stock SI one wont work...
Oooooh, and another thing.... When you are looking at the motor from the front of the car, the left side of the head, there are 3 ( maybe 4, but i think it is 3 ) sensors... Anyone know what sensor goes in the back of that group? in back, i mean, closest to the firewall on that side of the head ( transmission side ), And... One of them looks like a small something-or-other for fluid ( radiator maybe? ) whats that??
And another thing... On the back side of the top of the Tranny ( the top, but back by the firewall ) there is the little thing where the speedometer sensor plugs into, well, right next to that there are 2 or 3 very small hoses ( they appear to have been cut ) do i need those, or should I plug them??
Blah... I guess that is it for now...
Sorry for all the friggin questions, I just need to drive, and Ive asked these all over the net, no one seems to know....
Thanks alot everyone
Peace
P.s.- Feel free to slap the sh*t outta me for question after question... Its cool, I'd be frustrated too, lol
Im putting a 91' B18A into my 91' Crx Si ...
I have the Full motor, tranny, all bolt ons, ECU, Integra Axles and Linkage,and my si harness...
Now, I have had this motor for 3 months... When I got into it, I didnt do my damn research, and, from the idiots I talked to, I thought that it would 'Just drop In', haha!
Anyways, I FINALLY got the $ today to go out and get the mounts I need...
I have the LS linkage, So i can cut that myself and that will be taken care of...
So, I do still have a feq un-answered questions left, and I need to figure em out...
One, The MAP sensor ( firewall mounted )... Do I use the stock SI map sensor? Will the engine run poorly/oddly ? Err, will it affect it at all? If so, what do I do? I basically want this motor to run smoooth, because this IS my everyday driver ( and yes, Ive been out of a car for 3 months, lol ) and im fresh out of $...
So, If anyone knows about the whole MAP sensor thing, that would help alot...
The other thing is, I was told to take the spacers off of the Axles... What spacers?? Lol
I even had a friend online circle where they were in a picture of an axle, I looked.... Dont see anything I can pop off...
And Anooooottthhheeerrr thing.... The LS motor... I noticed that there were a few thin steel lines mounted on top of the intake manifold, and I cant seem to find where they go... Anyone got any input on that?
Oh, and..... ( lol ) What throttle cable do i need? I heard that the Stock SI one wont work...
Oooooh, and another thing.... When you are looking at the motor from the front of the car, the left side of the head, there are 3 ( maybe 4, but i think it is 3 ) sensors... Anyone know what sensor goes in the back of that group? in back, i mean, closest to the firewall on that side of the head ( transmission side ), And... One of them looks like a small something-or-other for fluid ( radiator maybe? ) whats that??
And another thing... On the back side of the top of the Tranny ( the top, but back by the firewall ) there is the little thing where the speedometer sensor plugs into, well, right next to that there are 2 or 3 very small hoses ( they appear to have been cut ) do i need those, or should I plug them??
Blah... I guess that is it for now...
Sorry for all the friggin questions, I just need to drive, and Ive asked these all over the net, no one seems to know....
Thanks alot everyone
Peace
P.s.- Feel free to slap the sh*t outta me for question after question... Its cool, I'd be frustrated too, lol