crx mpfi swap w/pm6, need help

We may earn a small commission from affiliate links and paid advertisements. Terms

BHCRX509

New Member
i have an 88 crx and doing the mpfi swap. i think i got everything hooked up correctly but when i turn the key its revving at 4,000rpm. so i just turn it off. i tried switching the tps wires but thats not it. and the throttle cable is intact but is not opening the tb.
any ideas that you can think of?
 

BHCRX509

New Member
okay i have found out that is something with my eacv. because when i unplugged it i have a sporadic idle 400rpm to 1500 back to 400 ect...

when i have it unplugged i have error code 14 but when its plugged in, i have idle at 4000 rpm and no error code. can anyone help me out?
 
Top