1st off my car is a 91 accord lx 5-speed. 2nd I was wondnering if this engine(F22B) would bolt right in(could i use my stock tranny and ecu)? Also how hard is going from no OBD to OBD1...? Thanks
Well i wasnt asking about an h22, my cai sucked in water in a flood we had and my motor blew. I dont have the money right now so i was wondering about this engine... any help would be appricated, thanks
Hey man, I got the same car as you. We come stock with an F221...the F22B is just a step up from what we got now. Better off goin with an H22A1 from the prelude. Its an easy bolt in motor for our cars.
To answer your question, yes. Any H or F series engine should bolt right in, with little or no modification to your mounts. Even easier with the F series. You can use your tranny, and MAYBE your ecu. Depends on the exact engine that you get. Little things might change, but they bolt up about the same.
Check the reference section for the differences in HP, torque, VTEC or Non-Vtec, Single or Dual OverHead Cams (DOHC)
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.