We may earn a small commission from affiliate links and paid advertisements. Terms
Originally posted by sk8er602@Aug 14 2005, 12:11 PM
How hot will my factory exhaust manifold get, is there any kind of glue or expoy that can deal with that high of heat.
I need to know b/c my o2 sensors threads came off and dont fell like droping a 100+ on a new one
[post=539878]Quoted post[/post]
Originally posted by smooth_criminal@Aug 15 2005, 05:01 PM
JB weld is the only thing i can think of that will take that heat. Just amek sure you give it plenty of time to cure.
[post=540229]Quoted post[/post]
Originally posted by VTECin5th@Aug 15 2005, 01:12 PM
One time my EGR pipe broke off from my EM (89 prelude).
JB weld will not hold it, it melts off like butter.
I did find a silver almost concrete looking material in a tube at AutoZone by the exhaust repair kits, the more heat it takes, the harder it gets, it worked really well actually.
[post=540374]Quoted post[/post]
Originally posted by confusatron@Aug 17 2005, 07:46 AM
It saved the 101st airborne during WWII.
[post=541086]Quoted post[/post]
Originally posted by drpenguin+Aug 15 2005, 04:09 PM-->VTECin5th@Aug 15 2005, 01:12 PM
One time my EGR pipe broke off from my EM (89 prelude).
JB weld will not hold it, it melts off like butter.
I did find a silver almost concrete looking material in a tube at AutoZone by the exhaust repair kits, the more heat it takes, the harder it gets, it worked really well actually.
[post=540374]Quoted post[/post]
Yeah i bet it works good. how do you plan on getting it out?
[post=540397]Quoted post[/post]
Originally posted by 92b16vx+Aug 17 2005, 04:20 AM-->confusatron@Aug 17 2005, 07:46 AM
It saved the 101st airborne during WWII.
[post=541086]Quoted post[/post]
That's SuperGlue, JB Weld wasn't created till the seventies. <_<
[post=541103]Quoted post[/post]