ok i swaped in a obd-1 b16 into my DA wich is or was obd-0(converted to obd-1 now) so i'm throwin only the IACV code after clearing the other codes and was wondering how everyone that has obd-0 cars wired in there IACV.
the iacv might be bad on the b16 and the iacv only has 2 wires on the plug. i made my obd-0 to obd-1 ecu umper harness and everything worked with my swap but i am still d-series but my but has the b16a and it is still a 2 wire plug i forget the colors but if you have a ecu umper let me know and i can see if a wire is misplaced other wire go find a iacv at a local unk yard or parts store but i don't think they are cheap but good luck
no the thing is i havent even tried to wire it up. i know there is only 2 wires, jus wondering if there was somewere in the bay that i could wire it to so i dnt have to extend it all the way to the ecu.
if it does not have the plug for it. look for a blue with yellow and black with yellow. i do thing the year matters but i have a 91 hatch but i hope this helps you
i have the plug for it wit wires coming off but jus want to know wat it wires to off the old harness..... if it comes down to it i will look at my diagrams but i was lookin for the easy way out
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.