I hate to ask questions that have probably been beat to death, but I can't seem to find the answers in my searches. So, here we go...
I've got a 2000 civic ex that I'm trying to drop a B18c into. I ordered the engine from Hmotorsonline.com as a full swap engine. Supposedly all I need to do is transfer the wiring harness from the D16Y8 to the B18C. Here's where my questions begin.
First off, I already have the rywire OBDIIb-OBDIIa conversion harness. I, also, just ordered the 8-10 pin distributor conversion.
I've still got a couple wire that I don't know what to do with though.
1. D16Y8 VTEC pressure switch??
I'm not sure if that's what the following connector is, but I don't know where the corresponding plug goes on the B18C. It's the green plug wrapped in blue painter's tape. Any ideas?
2. On the B18C
I think this is some sort of vacuum operated component for the intake manifold. It's got a 2 wire connector pictured below. Does anyone know what to do with this?
You can better see where it's located in this pic
Here's the vacuum portion of the assembly
Other than these items, is there any other work I need to do with the harness to get it to work correctly on the B18C?
Thanks, in advance, for the patience and help!
I've got a 2000 civic ex that I'm trying to drop a B18c into. I ordered the engine from Hmotorsonline.com as a full swap engine. Supposedly all I need to do is transfer the wiring harness from the D16Y8 to the B18C. Here's where my questions begin.
First off, I already have the rywire OBDIIb-OBDIIa conversion harness. I, also, just ordered the 8-10 pin distributor conversion.
I've still got a couple wire that I don't know what to do with though.
1. D16Y8 VTEC pressure switch??
I'm not sure if that's what the following connector is, but I don't know where the corresponding plug goes on the B18C. It's the green plug wrapped in blue painter's tape. Any ideas?
2. On the B18C
I think this is some sort of vacuum operated component for the intake manifold. It's got a 2 wire connector pictured below. Does anyone know what to do with this?
You can better see where it's located in this pic
Here's the vacuum portion of the assembly
Other than these items, is there any other work I need to do with the harness to get it to work correctly on the B18C?
Thanks, in advance, for the patience and help!