okay i swapped a h22a jdm engine into my 96 prelude,The h22a came with auto tranny.My car was a manual so i put the f22 tranny and flywheel on the h22a.Car runs okay,but I know it can run better.I checked the timing with the timing gun at 15 +/-2 on the flywheel (window where block and tranny meet)notice that the white mark wasent there.so then i moved the dizzy back and forward and still didn't see nothing.So my guest is the car might of jumped timing.My dad and I are going to work on the timing belt so I figured if im messing with the belt im going to try to set the car on time (if that is the problem).Also I notice alot of people have problems setting a jdm engine on time.Do i just set it like a h22a1 engine.I dont see the DTC mark on the crank pulley.Any heads up,or how to do this will help