It's always a good idea to do a valve lash when you pull the top end apart. The gsr cams have a different profile than the b16, so you might as well do it.
Yes u should adjust the lash intake is .007 and exhaust is .008 u allspice can take the exhaust to .009 for more power and adjust wen logos is cold have fun
i run my valve lash on the loose side in high boost cars to compensate for the valve expanding due to the extra heat. but you do lose a little lift and they are a litte noisy when cold but its a trade off
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.