Search results for query: *

...want gone, some universal type of parts I might not want gone so badly. Some prices do not include shipping; others we will figure out via. PM. *ALL prices, whether marked or not are O.B.O.* Make me a fair offer that I can't refuse.* HERE'S THE LIST (HAPPY SHOPPING!!) =Carbon fibre...

Hey guys, how do I find out if the transmission I am possibly buying is an Si transmission? What code, if any, is what? Thanks in advance!

Hey guys, I looked around for the most appropriate area to post this thread. Please don't get mad if I posted in the wrong area. I have a steering column issue. The story is; I took out my dash to put a new cabin wiring harness on the inside of the firewall because my old one was hacked. So I...

...stem seals -OEM (VTEC) solenoid seal -VISION 5-way adjustable cam gear LEFT UN-DONE: -Valve stems -Valve seats -Valve spring retainers -Camshaft *The following information refers to the cylinder head COMPLETELY apart* I am going to be doing a racing application. My plans are as follows...

Hey; I am looking to find out which high-performance oil pan I should use on my D16a6/D16y8 "mini-me" turbo project. I just searched and could not find a performance oil pan. I think Moroso makes one, but I do not know I will check again. Any suggestions are greatly appreciated, thanks!

...21) Cx taillights (OEM) not bad for functional use --- $40/pair 22) red stitched shiftboot --- $5 23) bumper direction lamps, short type --- $5 **I am looking for some parts to trade for (ALL for 88-91 Civic/CRX)** I need: 1) Civic crossmember 2) CRX taillights with the "CRX" center...

Hey, I am just looking to find out the valve stem outer diameter. I just do not have a Haynes manual for this engine, and I am only rebuilding the head where necessary so it is not even worth the $20-$30 a Haynes manual will cost. Thanks in advance!

I am planning on cutting my "C" plug so it will not show in my engine bay. I am planning to simply cut each wire and extend it by 4-5" each; solder, heatshrink, and electrical tape all connections. I just want to know; in the future would I regret this move or would I just simply put the engine...

Hey guys; I was at a carshow earlier and saw an 88-91 Civic HB with a clear hood. I have never seen one before and thought it was amazing. I figure since I am making my 90' Civic HB into a show car, I should get one. My engine is going to be show quality, and I want something to be able to show...

If you need an OBD0 - OBD1 conversion harness a.ka. jumper, let me know and I will make you one. I have all the material and know-how and I will charge less than what they sell for elsewhere. Thanks!

Ok guys, so I have started a wire tuck on my EF and it is definately a work in progress. So far I have tucked the; headlights, horn, washer fluid resevoir tank connector, markers, indicators, wiper motor, engine bay fuse box (now on the inside of the cabin), and obviously the multi-ground behind...

These are miscellaneous pictures of my build.

I made this thread particularily for my 1990 Civic Cx (converted to Si). I am going to post up many pictures. I am going to just post miscellaneous pictures, except my engine rebuild because it is in a different thread.

I have a MOMO steering wheel for sale.

I just thought this would be something some people may find interesting; the American version of the D16y8 is an EX, while the Canadian version of the D16y8 is Si. My dealer, honda dealer that is, told me this when I was asking about parts for the head.

...- Injectors - Fuel rail - Fuel injectors - MAP sensor - EACV - IAT Sensor - ALL Vaccuum Lines and Hardware (nuts, bolts, and banjo nut) Included *I do not have the manifold-to-head nuts (they can be purchased from Honda for about $12)* - Gaskets Needed! NOTE: This intake manifold and...

As the title states I have a D16a6 Block, D16y8 Head, and D15b2 Transmission. I was wondering what you guys think of this crazy combo. Open to any suggestions!. I found an excellent thread on rebuilding a transmission, so I am in the process of tearing it down for shits and giggles. The D16a6...

Hey guys; I'm doing a homemade turbo setup for my stock a6/y8 mini-me combo. I am just trying to learn about how to do this; price and quality effective. I have the D16a6 block at my local machine shop getting the machining done, then I'll be assembling that as well. Once I get it back I am...

So I decided I would do a mini-me, so I pieced the swap together bit by bit. Now I have everything. I decided to do a COMPLETE rebuild of the block and head. I feel that I spent too much money on this swap, please let me know what you guys think. D16y8 Head cost me $100 I have done EVERY gasket...

...(x2), 1st One Came Out Of My Running Cx, 2nd One came out of my Dx. ---> MANY Connectors From A Cx Wiring Harness (FREE!! with purchases over $20) **EDIT** ---> MOMO Steering Wheel, Large Tear on 12 O' Clock Position With Hub that fits 88-91 Civic/CRX and 90-93 Integra. $50 I might...