Search results for query: *

ust finished my swap from a carby eg to b16a.all the blinkers are fine except for the rear on the right hand side? what sort of things should i be looking for? the bulbs are fine i've checked that. it wouldn't be a ground issue would it?

works perfectly obd1 140 shipped and paypaled need the dosh after a quick sale

5 spd works perfect paypal only 120 pp reason: found a p08

120 shipped lemme know

few questions after my swap has been complete and almost running. Hunting idle. My breeze cluster has not tacho but my idle is really really up and down. There are a few things I read that it could be 1. TB Gasket - Need to be replaced 2. IM Gasket - is fine 3. Ex. Man. Gasket - needs...

car wont start i hear fuel pumping around the entire system so i knnow it's not fuel could it be the injectors? i disconnected one and turned the key twice - one of the pins on the injectors showed voltage with a test light, the other little pin didn't... does that mean something? what else...

dual carb (d15z2) to d15b vtec swap first question - where does this plug go. I think i removed it when i was attaching a few hoses now i cant find where it goes. This is the drivers side of the engine bay. (above) Next question. The thermostat wiring has this third brown wire that connects...

what do i need to add to the carby harness to swap to efi i've been told i need to add a pgmfi relay what is that and could someone tell me how to add this i know how to add the injector wires and vtec wires.. i also need to add the dizzy wires anything i'm missing here?

I have a dual carby eg and i'm converting to efi the ecu to engine harness only has one plug (efi ones have 3) so i need to add vtec wires and injector wires. I know where they all go. But I also need to add 9 wires for the dizzy, could someone show me where they go?

Function OBD1 Color Notes Injector 4 A02 Yellow Injector 3 A05 Light Blue Injector 2 A03 Red Injector 1 A01 Brown just trying to decipher this pinout diagram are these colours of the wires on the shock tower of the engine harness which i need to...

can a d15b (vtec) head go onto a d15z2 bottom end? its an aus spec dual carby (d15z2) i have the whole d15b vtec engine but if i can do a head swap i will is this possible? the dual carby actually has an ecu i've heard problems with the d15z1 in terms of compression issues is this the same...

or am i mounting it wrong here's some pics of my d15b and the dizzy i got off an si.. also there are some pics of the engine harness i picked up, doesn't look like anything plugs into the ecu....do i need anything more than this in terms of harnesses or will my dual carby have it already...

ok I just picked up my d15b and i was wondering which harnesses i can use? would a dohc zc be suitable? what modifications are required? would d16z6 harnesses be plug and play and would i also only be able to use p08 ecu's? coz they are hard to find any help would be appreciated.!!

Hey guys I picked up a zc for a decent price and i'm soon (once i find the time) going to replace my dual carby engine.. i have everything i need and I was wondering, what sort of problems or tricky situations did u guys run into when doing a swap... also, while the engine is out i plan to do...

i'm about to buy a zc engine wats the best way to check an engine if it's not in the car itself, what sort of things can i look at to determine if the engine is in decent condition

I currently have a eg hatch dual carby setup and I was told that if I want to drop in a ZC engine it is possible to use my existing wiring harness, because (as I was told) even tho it's dual carby, it still has an ecu.. It's the Aussie 'breeze' model.. Is this tru, and if so can anyone point...

my car is obd1 and i wanna put the obd2 dizzy in it.. the guy selling the engine doesnt have the dizzy so would i be able to use my obd1 dizzy? my car is carby so i know i would need fuel tank/pump/lines i would also need an ecu and wiring harness correct? am i missing something at all? its...