Whats up all. I'm puttin in a LS/Vtec into my 91 CRX. The car already has a B16a swap. What I need to know is which header i can use for this set up. I dont think the one on the B16 will work not enough clearance between header and oil pan. I can get my hands on a header for a LS Integra will...
i have 91 crx with a ls/vtec. im going to use the progress b series swap springs and the drop is listed at 2in. i have a set kyb agx's and it is not recommended to go below 1.5 in. also since i put this motor in eibach pros and kyb struts easily bottom out. ride quality is not that important...
I swapped a b16a into my 91 crx damn over two years ago where does the time go. i just picked up a b18a block that has been rebuilt with arp rod bolts, p30 pistons, and bored to 82 mm. i have two questions is the 82 mm bore to much for the stock sleeves will this cause a problem later on and...
I have been searching for hours now and got a damn headache. So I figured I would turn to those who have given me a wealth of info before. Does anybody know if there is a write up or link on installing JDM power folding mirrors onto a USDM CRX. i just want to make sure I'm not missing any parts...
im putting together a gen1 b16 block w/ a 2000 gsr head and needed to know do i purchase head studs that match the head or the block. thanks to all that reply.
Someone help please i have been looking for a thread that explians how and what part #'s work best to do a obd0 to obd1 swap. thanks for the replies.;)
Well here it goes. Y1 cable tranny makes a whining noise when cruising at 35-55 mph in 3rd- 5th gears. The higher the gear the higher pitched the whine. sound goes away (for now) when accelerating, decelerating or the speed is out of the 35- 55 mph range. I checked the fluid and its in good...
I need to replace the LMAs in my engine and not sure if i need to get the parts for a 94 del sol or another year and make. I have searched this and could not find an sure answer. i recall one thread mentioning using the LMAs out of a H22. Also, do any of the after market suppliers manufacture...
i was thinking for putting an EDM speedo in my 91 CRX. if ne1 out there has done this swap. i would like to know if there is any wiring that needs to be done and how difficult it will be? also, will the stock speedo cable mate with the EDM unit?
Someone help! I cannot find a header for my b16a sir1. Is there a manufacture that makes a header with the to bungs needed for the o2 sensors. If not can the o2 sensors be rewired to use an obd1 header. Thanks for your replies and info.
I have a 91 CRX DX with B16a, Y1 /LSD. Everything with the swap went great until i took it out of the first drive around the block. i have a serious vibration over 20 mph when the car decelerates, making a right hand turn or pretty much any time weight is transfered onto the front driver...
I am having a problem with the drivers side axle. It appears to be long. I can get the axle in the hub and the suspension bolted on but the axle is binding and is preventing the suspension from traveling up and down, also the camber adjuster is pulled all the away forward. i have an obd 0...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.