Search results for query: *

I'm getting a shaking in the steering wheel when I brake. It's more prominent when braking lightly. Here's the story... I put on new rotors, put on winter tires/rims and had no issue at all. After a couple of weeks I swapped the rear wheels with the fronts and now there is vibration when...

Need some help people, My rear drum brakes on my 92 civic are squealing when braking. I've checked the shoes and they're basicly new. The squealing happens at very low speeds, so basicly when the car is almost coming to a stop. Could it be that the brake shoes are no good? ie: the compound...

If I'm getting my DOCH ZC flywheel lightened by a machine shop, how light should I be making it?

I've got a DOHC ZC that I'm going to put into my CRX. I need an OEM clutch for it so I want to know what I should be asking for at Honda. It is a cable tranny and it has a sticker L3-1238824 on it. Is that enough to identify it? What car/year should I be asking a clutch for?

What should the numbers be for a compression test on a JDM H22a.

I just put the head back on my DOHC ZC block and torqued everthing. Will I have to retorque the head after it's been running for awhile?

Say if I was driving straight and I shift from 2nd to 3rd, the steering wheel will pull to the right and then straighten up again. I also notice this if I drive real slow and push the brakes the wheel will yank to the right and when I let off the brake it'll straigten up again. I've also got...

Hey guys, I'm about to pull the motor out of my CRX but it has an AC system. Do I have to purge the AC system before removing it? What is the proper procedure to disconnect the AC. I want to make sure to do it right so I don't have some toxic shit spraying all over the place while i pull the...

I just did a leakdown test on my DOHC ZC and here are the results Cyl #1 - 27% leakage ; mostly from exhaust valves Cyl #2 - 20% leakage ; mostly from exhaust valves Cyl #3 - 50% leakage ; mostly from exhaust valves Cyl #4 - 25% leakage ; mostly from exhaust valves These numbers seem pretty...

I bought a compression tester which basicly looks like a hose which screws into the sparkplug hole and a gauge. Now my question is, how the hell can I screw this into the sparkplug hole when its so deep in the head? Is there an adapter or something that I need along with this tester? Is there a...

I need to replace the shift linkage cable for my 93 H22 swap. I was wondering if the accord also uses a cable linkage and if so, is it the same as the prelude cable linkage? Thanks.

I just wanted to confirm with you guys if the D16A6 tranny will bolt up to the D16Z6 motor?? I need to put the Z6 in my 89 CRX and don't want to convert to hydralic clutch.

Hey guys, I have an issue with my 92 Honda Accord. Only really humid wet days all the windows keep fogging up from the inside. Even if the car is parked with no one in it, the windows will be fogged up. In the winter, there's frost on the inside of the windshield!! I remember someone...

Who makes mounts for the H22 into a 89 CRX?

Anyone know how to run the IAB solenoid for an H22 with the P28 ECU?? Also does anyone when the IAB is activated/deactivated? What RPMs?

Anyone ever noticed that the D10 pin on the ECU connector is missing? It's supposed to be the ELD signal. I checked two 93 Civic Si hatch's and then both had the D10 wire missing! Every wiring diagram I've seen shows this pin as GRN/RED: ELD UNIT (U/H F/B). Has anyone seen this before...

Does the intake control solenoid have to be hooked up? Its supposed to control a diagphram on the intake pipe by the air cleaner (on a prelude anyway) I'm guessing this is not required on the civic but I just want to confirm. Can I leave this out? BTW It's a JDM H22a with the P13 Ecu. Also...

Whats a good exhaust setup to put on an 93 H22 Civic? I want to spend as little as possible and want it as quiet as possible. What pipe size, muffler would ya'll recommend? Right now I've got some piece of crap Flowmaster on it with 2.5" pipe from header back without a resonator. It is...

I just changed the timing belt on the H22 and I fucked with the belt that goes on the harmonic balancer. Now start the thing up and find it's sending pretty bad vibration through the car. I didn't see any sort of marking on the balancer shaft pulley when i was putting it all back together. I...

Guys, I'm still having this problem with my H22a. It keeps throwing CEL 23. I've replaced the Knock sensor, checked the wiring, even replaced the ECU (P13). What could the problem be? It seems to throw the code when I hit Vtec or go up a slight hill. Now what I don't understand is whether...