Search results

  1. D

    some stuff for sale/free

    Hey guys, anyone want a CX motor out of 94 hatch. Some kid wanted me to pull it out and throw a new motor in. I did it, I guess the car burnt oil as fast as the middle east can produce it. the passenger side tail light actually looks brighter after wipping my finger over it. just to tell you...
  2. D

    d16z6 swap question

    try unpluging the tps sensor. it will throw a check light but if it is the problem. it will show it by letting it run right. i had a similar problem and that is what was wrong. when i first did my swap, i couldn't rev past 2500 rpms. but i changed the tps sensor and it worked fine since. Darin
  3. D

    internal actuator

    hey guys, i am running the internal wastegate actuator on my T3. I bought a new one cause the arm on the old one was bad. I have a problem though. the old actuator had one spot for a vacum line to be hooked up on the canester end. the new one has two spots for vacumlines. what do wach of...
  4. D

    FS: Trunk lid and spoiler

    I have a trunk lid off of a 92-95 civic EX. unsure on exact year. It is red and practically mint. It has a minor scratch on the top about 5 inches long. can be easily buffed out, no joke. with the center tail lights, i will sell for $90 obo. PLUS SHIPPING. or free meet and pick up. I live...
  5. D

    fs: fmu, injectors

    hey everyone. want to get rid of these b16 injectors. any takers for $35 shipped? e-mail me if ur interested. Darin
  6. D

    Oil

    yeah, it is just a little thicker or an oil. I have a friend who used to burn oil like crazy when he gave it, so he switched to 10w40 and hes run it ever since, and the oil burning problem has been reduced. Just don't mix. use all 10w40 or all 5w30. it should be fine DArin
  7. D

    fs: fmu, injectors

    I have an almost new FMU 12:1. I used for about a week and then I took it out. I have used B16 injectors, they work great and are very clean. I will sell the FMU for $70 shipped. and the B16 injectors for $50 shipped. let me know by email. snowboard_guy09@hotmail.com thanks., Darin
  8. D

    Detination Really Bad....Help

    yeah, use the 450 injectors. with that much boost, you need to get more fuel. you shouldn't be reving past 4000 rpms even with the vafc turned completly up. also, the stock fuel pressure regulator might not bee lean enough with 450 injectors, I am using an aem turned a little below stock...
  9. D

    best boost tune for the $

    I am running a T3 turbo on a b16, and i have the FPR and FMU 12:1 w/ check valves. what should i use to tune it. I have a VAFC- II in and I was planning on that. I am running stock B16 injectors and stock internals. any thing i should consider buying? I am real tight on money now, i have a...
  10. D

    BOV vacum line

    hey guys. I have a 93 civic ex. with, B16 swap. I am getting ready to install on next week. I want to know which place do you think is the best to run the vacumline off off the BOV. and which line should i connect the FMU vaccum line to also? is there a better place than another? Thanks, Darin
  11. D

    Clutch questions

    hey guys, i have a preferance question for you all. I am going to need to upgrade my clutch because I am going turbo. I was wandering what you would suggest. I have found a Clutchmasters Stage 2 or 3 for 445.00. they are the same price. otherwise I was looking into exedy. but they have...
  12. D

    any ignition

    hey guys, all one of my friends has been telling me is that i need to get ignition setup for my turbo. he is one of those guys that just reads shit and doesn't do any hands on stuff. so I don't know if he even knows what he is talking about. I have a B16 and i an throwing on a T3 and...
  13. D

    vafc wiring

    Hey guys, I just got the APexi. VAFC II. I mounted it and hid the wires. now, when I go to connect it to the ecu harness. I was planning it out(looking it over) and in the book, the pinout for it doesn't show where the VTC cam signal wire goes, or the TDC signal wire goes. I don't know what...
  14. D

    what fuel management to use?

    thank you, thats what I was figuring on doing. I just wanted someone elses opinion. anyone else have anything to say??? Darin
  15. D

    5th gen hatch swap

    reasearch is probably the hardest part. for the 5th gen hatch, your going to want a ODB1 motor so that the wiring is bolt in. I would go with a LS or a B16 from a USDM Del Sol, or JDM from a supplier somewhere. Hmotorsonline.com or jspecautosports.com -- thats where I got mine. If your going...
  16. D

    b16a3 in 99 Si???

    yeah it probably does. I don't think that it would have even pluged together. the distributor wires would all be different. so I am suprised that it runs. tell him to purchase the OBD1 /2 conversion harness. I think that would take car of it. I am not positive though. what do you mean no...
  17. D

    Honda heads... please help!

    yeah, sincros??? that would mean that if they are all off. you wouldn't be able to shift, or it would be extremely difficult. check the vaccum lines, and then the tps sensor, make sure its not broke. Darin
  18. D

    93 civic DX b16a2 swap ECU ???

    your best ecu for your car would be an auto P30 I believe. The P28 is for a EX. which two things are wrong, its manual(doesn't affect it that much) but that it won't rev to 8,200. only 7'000. the p72 is for a gsr. they have secondarys, your b16 doesn't. don't run that. Its been a while since...
  19. D

    what fuel management to use?

    I am finalizing my turbo set-up. I have bought the following parts to work with the Fuel. 12:1 FMU. VAFC II. and I was looking into injectors. I have a FPR that is set to pretty much the stock settings. I was wondering which is the best way to go? I made the check valves also for the map...
  20. D

    vafc I or vafc II?

    thanks guys, I ordered up the VAFC 2. I think it should do. Darin
  21. Try your Search on Google

Back
Top