orangepeelSi
New Member
last month I had put a 1994 B18c1 into my 1991 da integra everything had went fine driving it was awsome but last week i ran into an issue that no one car figure out ok now on to the problem i was driving home and all the sudden the car had a studder to it I can't rev pass 2k rpm but at idle it is fine so far i had replaced to fuel filter and fuel rail just don't know where to go from there. the motor was converted to OBD0 and i have a PR3 jdm b16 ecu for it All advice is helpful at this point