I finished My b18 lsvtec swap and now My ecu is throwing a code 17. I replaced the Speed Sensor but I am Still getting the code. I am using the jdm y1 cable tranny. Would this be the problem. I am not using the cable speed sensor I am using the digital one. Any one have any Ideas. Thanks
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
code 17
- Thread starter Quick EG
- Start date
- Replies 2
- Views 875
We may earn a small commission from affiliate links and paid advertisements. Terms
Originally posted by pissedoffsol@Mar 17 2005, 12:25 PM
a digital vss? if your talking about obd0 VS obd1/2 pulse differences, then ok, you should be good- match the vss with the ecu.
if its not working, make sure you put it in right. theres a little pint in there that needs to be lined up properly.
[post=474808]Quoted post[/post]
The vss is off a 94 civic. The ecu is a p28. OBD1
What Pin are you talking about? the one that regulates the voltage? It seem right.
Could I have a ground problem?