NO AC!!!!

We may earn a small commission from affiliate links and paid advertisements. Terms

Blk_95_lude

Junior Member
recently i found out that my ac wasn't connect, i plugged it in only to find out that there is no power in that wire. The compressor is fine because i jumped it from the battery and it kicked on. I tried to follow where the wire goes but its a bitch because it blends into the harness really good. I was just going to run my own wire with a switch but i'd rather find out what the problem is first. Thanks
 
:werd:

Check your fuses. Then, trace the wire back as far as you can, and observe the color of the wire. There has to be a relay for that wire. You should only have to replace the wire before the relay or after it. If your switch is working properly, you should have continuity between the terminals when depressed.
 
Back
Top