Hey guys I thought that I should share all the pictures I have of my project since most of you have helped me through my difficult times trying to get this car right...still needs a lot more work but just want to show you everything I have done from my D16Z6 to my B16A1 SiR2 Swap....The B16 is now in the car and running with 1,182 miles on it...just got it fairly broken in. I did all the work myself as my first real big continuing project. I work at a speed shop this summer and had a part time job at a machine shop which taught me a lot of things...might not be perfect but for a first timer and beginner I think I am getting there...I first wanted to do this setup for turbo then changed my mind to N/A then said to myself "I already have low compression" so now I guess I am sticking with turbo. I will be adding a t3/t4 60-1 from turbonetics sometime in late this winter or early spring...I know I know I did not sleeve it but I bored it and honed it and going to add a blockguard with the turbo (only planning on doing 15psi or so with hondata...so a blockguard will be fine for me...want to see at least 325whp...feel free to ask questions as I have had MANYYYY of them here for you guys and please feel free to leave positive and negative comments....negatives are always good to make my project better...and positives are good to make sure I am heading in the right direction...check this three links out which is where my pics are from D16Z6-B16before-B16after...enjoy
https://hondaswap.com/gallery/browse.ph...hp?album_id=726
https://hondaswap.com/gallery/browse.ph...hp?album_id=727
https://hondaswap.com/gallery/browse.ph...hp?album_id=725
https://hondaswap.com/gallery/browse.ph...hp?album_id=726
https://hondaswap.com/gallery/browse.ph...hp?album_id=727
https://hondaswap.com/gallery/browse.ph...hp?album_id=725