Ok I have a b18b and I recently replaced the flywheel with an light weight one and a new racing clutch and pressure plate. I also replaced the through out bearing and pilot bushing. This afternoon I was trying to bleed it with the bvacume bleed because it would not go into gear. However the dang...
How the heck do you replace the tps I broke mine on my b18b while removing it. I noticed there are no screws just nuby rivit like things? Please help. :worthy:
Ok got the engine in and all connected however when i turn the key it tries to start but wont ( I suspected not getting fuel). So I listened for the pump but heard nothing. However I noticed a buzzing coming from a relay under the dash. I removed the relay and it says main relay on it. I tried...
Well I just got done swapping a b18b into my 93 HB and doing the auto to manual conversion wich was rather eazy thanks to HASPORTS new mount. However I have one question. How did you guys mount your linkage I tried to use the holes from the auto by troping screws through but it did not work...
Well I got to many projects going and my land rover is now up and running so I'm saling my daily driver to finish one of my projects. It is a 93 Civic HB whats wrong with it well here goes.
I hit a simi retread in the road so the paint on the front is messed up good thing i had a urethane kit...
I have a few del sol parts if anyone is looking.
93 whole dash. $50
stock tape player $10
Fenders in good condition primered. $75 each obo
Hood primered in good condition $75
95 civic 4d driverside HL $35
2 D series non vtec heads eith no distro 1 has a valve cover $10 each.
1 has a...
I just got done swapping a d16z6 into a 90 Hatch. It starts up and runs but I have an problem when I press on the gass I don't get any throttle response. I checked the cable and it is connected and tight. What else could it be?
I have a 92-95 d16z6 AirMass ceramic blue coated inside and out header for sale. It has never been used and is still in the box. I need money to pay school bills. I boutght it for $300+ shipping I'm asking for $250shipped. I'm located in louisville KY
Mark
I have a head that was P&P by a local drag sho here in town. I just need the money to pay for the college bills so I can register for summer classes. Asking 175obo I can e-mail pics if you need. DarwinVtec can give you good reff for me if you want I just need to get rid of it quick.
Mark
I need a trustworthy person in milwakee that will pick up a fender for me at a local yard and send it by greyhound bus. I will pay for the fender and shipping and throw in $20 for the trouble. Thanks
I am parting out a del sol I have almost all the parts from the doors back. I do have a few front parts but not much. Let me know what you need and we can work a deal.
Mark
I am doing some spring cleaning and got some junk to sale.
First is a 92-95 Hatch wing looks like the one in pic but it is primered never painted or installed $150
Next is a Holly fuel Rail. This is the high flow one that requires an after market FPR. It flows that musch fuel. Designed for...
I was wondering if it is ok to run nitrous with high compression pistons? If not will i loss HP with the low compression pistons untill i use the nitrous?
Thanks
OK,
I am swapping my DX 1.5 out for a d16z6 and was wondering the following. Civic is 5th gen
1. What is the diffrence between an EX and a DX wiring Harness?
2. What ECU's can I run with my d16z6 swap?
Ok here is the deal. I just replaced the head gasket on a 93 Civic HB DX (auto). I went to crank up it cranks but will not start. So I used one of those compression testers that screw into the spark plug socket and got 90lbs on all 4 chambers. I then tested all my wires and spark plugs. 1 was...
I got a Holly B series Fuel pressure regulator the other day in the mail. It is the wrong one for my fuel rail as I have a after market Holly supperflow fuel rail. I am saleing it for what i paid if no one wants it i'll just ship it back and get the right one. It cost me $140 it is really nice...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.