put the gsr motor into a 90 crx si the wires were raw on the o2 sensor when i first started it there was no codes but while it was running the wires on the 02 sensor touched and now i get code 41 for the o2 heater circuit would you say i shorted out the heater in the o2 or did i do more damage...
anyone know any sites i can buy a new hasport linkage from to put a b18c1 into a 90 crx i orderd one from landspeedracing.com because they said they had one
when i called to ask them where it was they said they had to order it that was jan 21 called last monday they said its been shipped...
im putting a 95 gsr motor in a 90 crx si i have been working on the engine harness for like half the day now swapping obd-0 connectors to obd-1 now im at the injector resistor box i have the 8 wire cap off off of the obd-1 harness
my ? does the red/black wire connect to all the yellow and black...
when i change from obdo to obd1 there is 2 white wires which one goes to yellow/green (they say the large white one) but they are both the same size??
the white to white controls cypg
the white to yellow/green controls icm
anybody know where i can get a pinout of a obdo distributor (i have...
so i got my b18c1 going into a 91 crx si do i use the gsr subharness or take the one off my si motor? what more do i need?
i have already b18c1 motor gsr hydro trans,p72 ecu i have the cv axles out of the integra also the teg was a 1994
i know i need the obdo to obd1 ecu jumper and the...
ok i have a 90 hf crx body im planing on fiberglassing a dash the hf is just a shell
so i was thinking about useing all wires out of a 95 gsr and instrument cluster and molding the cluster into the fiberglass dash enclosere i am going to put the b18c1 in the hf so i know this is going to...
while driveing to work the other day the skid plate came loose on the pass side of my crx si while it was flapping in the wind it unscrewed the radiator drain petcock
and drained my radiator i have no temp gauge since i had blue face guages installed so i blew the head gasket well i changed...
Ive got an si with a blown motor so i put this hf motor i had laying around in my si
at first i couldnt get it running so i took the harness off of an old dx motor i had laying around put it on the hf it runs but after a couple of mins its like the choke kicks off or some thing i get a check...
does anyone have a link that shows the diffrence in body styles in a crx
they changedsome stuff on the body in diffrent years i have seen a list before but cant find it thanks chris <_<
motor is in the car already but---- what is the best way to wire it up the motor is obd2 and the si is obdo so is there a jumper harness or something for this??
what do i need?? car is still on jack stands with no axles in yet ,i still have the 98 integra that the motor came out of but it...
i have a 91 crx si with a 1.6.. the motor blew so i have a 1.5 out of a 90 crx but it is not fuel injected can i swap intakes and make this motor work in my 91
how hard would it be and what would i have to do if the intakes will switch??
chris
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.