Search results for query: *

I came across the New Skunk2 Pro Series Intake Manifold which they say went to 68mm (63mm on old version) and it has bigger runners which are more evenly matched. Sounds good to me - but need some feedback on it. Options Auto Salon claims the following: SKUNK2 PRO-SERIES INTAKE MANIFOLD...

Is it possible to upgrade from low impedance injectors to saturated injectors (like when going from OBD-0 to OBD-1) without actually upgrading your ECU ?? In other words, is the OBD-0 ECU capable of supporting saturated fuel injectors ?? Thanks

I was wondering what size fuel pump to use for an LS/VTEC setup that should soon be capable of 200+ HP ?? Is the 190 LPH adequate or should I get the 255 LPH from Wahlbro ?? Is bigger better in this case ??? Thanks

I have a Big Brake Kit installed on my Integra GS-R and would like to get some upgraded calipers on the vehicle. I hear upgrading the calipers is a great brake upgrade ! I have secured some Prelude VTEC Calipers which are the same as the ITR/92+ Legend/Accord V6/Accord Station Wagon. The...

I was wondering if the Integra Type-R uses a bigger Clutch Master Cylinder than the other Integras ? I think the others use a 5/8" clutch master cylinder. Anyone knows what size the Integra Type-R uses ? I hear the bigger the piston the better your shifting (same principle they use for the...

I have a LS/VTEC that I would like to build up to about 225 HP naturally aspirated, but I would like to do this safely and reliably. I am interested in knowing how much internal upgrades do I need such as with the valve train, pistons, rods, bolts, cams, etc. Also ECU, ignition and fuel...

I have a 1995 Integra with a LS/VTEC engine with about 175 HP and doing some mods that would probably take me up to about 180 - 185 HP. I currently use a set of 270cc fuel injectors. Are these adequate for my application ? If not, what size should I get - 310/320cc, etc ? Thanks

I have a 95 Integra and had to change my gearbox to what I could get at the time which was a Y1 B16 cable gearbox converted to hydraulic. We had to do some amount of dressing up to get the transmission mount to work and the guys did some sort of welding to create the stabilizer mount bracket...

Does anyone have any recommendations as to which is the best Octane Booster on the market ?? Is there any Octane Booster that will raise octane level more than 10 points ? Thanks

I hear of upgraded silicone plug wires at least 8mm will reduce the possiblities of leakage, etc. and produce a more reliable spark transfer. I hear lots of people say stick with the Honda OEM plug wires because the work the best. Can anyone say if they would recommend getting any sort of...

How do I troubleshoot an error code #9 ?? I have 95 LS/VTEC with an OBD1 ECU, distributor, etc. using a Conversion Harness adapter. I am using a P28 chipped ECU which is looking for the Knock Sensor signal. This initially triggered a CEL code #23 which corresponds to Knock Sensor, but the car...

Was wondering if there existed some sort of upgraded rod bearings for the B18B ? If so, who makes it and where can I find it ? Thanks

I have an LS/VTEC engine with stock LS rods, rod bolts and PR3 pistons. I would like to rev to about 9000 rpm and build in excess of 185 HP. I am planning on upgrading to ARP rod bolts and ARP Head studs. I am contemplating upgrading to Eagle rods as well, but funds are scarce so I won't do it...

I would like to know if it is possible to visually identify an Integra Type-R gearbox and tell it different from the GS-R gearbox. They both use the same code of S80, so I need something else to differentiate them. Thanks

Does anyone know if there is a 4.785 final drive upgrade for a B16A Y1 cable gearbox? Thanks.

I have been hearing great things about water/methanol injection recently. Several friends have used it for their boosted applications with great results. I hear that it is also available for N/A applications and offer the same benefits but of course with less dramatic results. What do you guys...

They say low temp thermostats and theromswitches help to reduce engine temperature by activating the coolant/fan at lower temperatures. This should help to save the engine, minimize possible detonation and help engine performance. Has anyone tried it? Does it work? If so, which one to get -...

I always see people speaking of tuning their engines and then burning their newly created files to a chip. What I don't understand is how do you make adjustments to your fuel and timing while tuning? Take for example Uberdata - do you have your laptop connected to the ECU and the Uberdata...

I am considering the best way to tune my LS/VTEC setup and I'm considering to use Hondata or Uberdata. Which of these systems is easier to use and to program for a DIY programmer? Which one can allow tuning without the dyno ? Which one yields the better results (or performance)? - Which...

I am curious as to which is the better of the Apex-i V-AFC II or the Fields VTEC Controller ? Which one is easier to use? Which one is easier to program/install? Which one gives better results (performance)? How do they compare on pricing? Any help would greatly appreciated.