Search results for query: *

so i swapped a 2000 non vtec obd2 engine in my 94 non vtec obd1 integra, droped engine in with stock harness and everything using a p28 chipped ecu.. problem is everything works besides rpm guage, only thing i can think of is that i swaped the guage cluster from the stock one to a gsr one few...

hello guys i did my h2b, now iam getting a ELD (code 20) and a egr (code12), plus my throttle response is horrible, iam also using a p13 ecu which is the reason iam getting egr code becasue i dont have it hooked, up, could that cause hesitation, my main question is a bout my resistor wirng...

ok guys, need an opinion, i just swap a type r suspension setup on to my non type r integra setup where i had to use the type r rear LCA, my original one doesnt fit the type r LCA and i dont have the type r sway bar, so you guys thinks a rear lower tie bar will do the job it self..thanks

ok guy, i have a 94 teg obd1 non vtec, iam dropping a 95 jdm h22a obd1 vtec engine in it, i already have a obd1 p28 ecu, a obd1 gsr (obviously vtec harness).. my question is, iam not quiet clear on if i still have to run vtec wires to the ecu manualy, just like i would do if i were to use my...

hello guys i have a h2b setup and iam currently getting the p28 ecu chipped and programmed, just wanted to know whats the best setup for the h22a stock with minor blot on like i/e/h etc... thanks guys

HELLO GUYS IAM LOOKING TO BUY A QSD H2B KIT FOR DC INTEGRA, iam interested used or new pm with offers please, thanks

ok guys have the chance to go grab a obd0 b16 vtec harness for cheap, can i use that or does it need to be obd 1 like the h22 that i have, an i was planning on using a chip n tune p28 ecu which is obd1,,,, so does that mean i would also need a 0bd0 to obd1 jumper....

hello guys, there a guy in my city parting out his rex, and he has alot of good name brand suspension part, control arms/ upper-lower, coilover etc... can you guys let me if any of those crx parts are compatable to my dc2, the only reason i asked, is because with the coilover is noted that it...

hey i just got my h22a in, just wanted to know what the easiest way off making 200 whp from my h22a, i/e/h etc.

hey guys couple questions with this swap, do i change the power steering hose from the civic, to the hose from the integra so i can use the b18b pump or can i use pump from the civic, let me know thanks, also idle problems, its spikes up to 1450-1500 rpm, and fluctuates there, you can hear it...

question about left driver side, mount, i ordered the left side mount from honda from the 99 civic si, everything fits, besides, there is only one hole at the bottom that lines up to make the top line flush, the others two holes up top doesnt work at all, is this the way this swap should be, or...

HEY guys i have a borla xr1 3" muffler with a full 3 inch system from header back, with a 14" /3" inlet resonator and a regular size 4-2-1 stainless headers, its on a b18b integra which will be soon a built h22a turbo, if your wondering why 3", i have 2 problem at 2700 rpm and only then it will...

hey guys all my light work except my fog and these are the two wire that are left, any one that has done this swap can you please let me know how you went about wiring this up

HEY guys iam planning on putting some 95 h22a injectors in my 94 b18b motor, and turbo it, with full tune and everything done well, whats the max hp limit on those injectors

hey guys my 3rd gear in my car seize to stay in and all it does is make this loud grinding sound, but my 1 345th and reverse work great, so does this sound like a tranny problem or a cllutch , thanks

Hey Guys Just Needed To Know From You Ludes Guys That Have H22 Turbo With 3 Inch Exhaust, Whats The Best Exhaust System Or Muffler That You Have Heard... Thanks

i was just wondering i have a jdm h22a that i plan to turbo and make 350whp how big a should i go on the exhaust 2.5 or 3, with plan to make that much power. also whats the best exhaust setup(CATBACK,MUFFLER ETC..) that you guys have heard with a turbo h motor

ok guys i have 1995 h22a that i plan to turbo, just would like to know from people with more experience and knowledge about ecu than i have, if my goal with this engine is 300-350 whp, which ECU do you think is best for me to get chipped and tuned and why?,also its going into a integra with a...

well guys, i am able to get a really good deal on a 01 civic, but i already have h motor that i was originaly planning on putting in my teg, just want to know if this is worth it or its going to be more work than putting it in the teg. also, if anybody has done this swap let me know how it went...

well guys, i am able to get a really good deal on a 01 civic, but i already have h motor that i was originaly planning on putting in my teg, just want to know if this is worth it or its going to be more work than putting it in the teg. also, if anybody has done this swap let me know how it went...