Search results for query: *

Have any of you had the chance to pick up the new Falken Azenis? Just want to know if they are just hype or actually work well. Any suggestions for tires as well? I have a set of Mugen MF10L Mirror face 15x6.5.

Well my original choice for coilover where going to be Tanabe Sustec Pro S-S Type-II, but a friend of mine has some Buddy Clubs on his Type-R and it rides pretty smooth. So what about Tanabe? Just another JDM Hype?

I was recently thinking of purchasing a Buddy Club Racing Spec Damper kit for my EK9 but was curious to know if the Tein Type Flex would be a better choice since you could add the EDFC later on in the future? Also do you guys know a place where i can order the EDFC if i choose to purchase the...

As of right now i've been talking with someone to build my B18c, so not sure on the compression though, just making a list of everything i need to buy first before i start spending my money. So sol, you think the skunks would be alright? someone else told me just go with Toda C's but i've also...

I was wondering which cams you think i should go for: JUN stage 3's or Skunk 2's? Also do you guys know of a website were i can order them from? I looked at Inline Four and they have them, but i'm wondering why everyone says stay clear of them?

Money isn't an issue but right now i'm thinking of keeping it all motor for now then maybe going turbo later in the year. So you guys think i need to bore it out any? Also what brand pistons would be good for the swap because i'm thinkin of getting some ITR pistons maybe?

Well about the pistons, what's a good compression ratio and what pistons do you guys suggest to purchase? Also do you guys think it's worth the money to resleeve the Gsr block and should i get it bored out to 84mm or something close to that? Just curious if anymore work needs to be done to the...

Alright i was wondering your guys opinion on this swap because i'm close to purchasing it from HMO, the Type-R complete changeover. I'm thinking of purchasing JUN 3 Cams, Cam Gears, and Valve Train or TODA SPEC C Cams, Cam Gears, Springs, Titanium Retainers, ITBody, and Toda Timing Belt. Which...

I was wondering what you guys think would be a better engine build to run 13 flat or even high 12's: a b20 buildup or a b18c5? Because the cost for a b20 build seems kinda steep and seems like u get the same amount of bang for your buck if you just buy the b18c5 and do a little work here and...

Very amusing comment but you know the funny thing about this is this part of the forum is sponsored by IMPORT BUILERS. The same people who told me that a 87mm Crank would be better and here is the direct answer i got from them: Is a 89mm crank sufficiant enough because i was told a 95mm...

Alright i was wondering about compression on some pistons i was thinking about purchasing. The compression ratio is 12:1. Is this a good ratio for 92 octane? And for the crank, someone said 87mm would be best because less torque would be better. Is that true because i was reading through one...

I tried the link to the Intercrew store on this page but it doesn't work. Do you guys have a url for it and bout the 9k racing, what would be the url for that page as well?

Thanks for the advice. By chance you know any good places to order some of the parts i was looking for because i was told Inline 4 tends to rip you off on what you get.

Alright so i've been saving up money for doing a swap for the winter season and wondering is this setup for a B20 into a EG good enough to run low 13's: -B20z with GSR head (does it matter which year i use?) bored to 84.5mm with JE pistons/Eagle Rods -TODA spec c cams, cam gears, springs...

I was wondering how much roughly would it cost to swap a gsr motor into my car? I know you have to end up buying the axles,water pump, oil pump, etc. for the swap, but what sorta internal upgrades would be neccasary (ie. cams,cam gears, retainers) for a good all-motor/daily driven? I'm sorta...

I just recently gotta a Phantom tach from a friend and was wondering how to wire it to my 98' CX hatchback since it didn't come stock with a tachometer. I heard that you connect the green wire to the blue wire near the fender but dont know exactly how to wire the rest of the wires. Any help...

I've been doing some research into swapping the B20 into my hatch. I was wondering which year would be best for the swap, i was thinking about going with the B20Z from the 98-01. What do you guys think?? Will i need any certain mounts or will it just bolt right in??

Just wondering if the sizez of the front and back speakers for a 98 hatch are 6.5''. Besides that, has anyone installed the Pioneer Rev Series speakers?? Curious if they produce sufficient sound or if they're just crap.

Haha gyea i gotta full Bomex kit, was just wonderin what was up with the kits thats all

GTP Vader Kit Veilside Webpage