Search results for query: *

HISTORY: Have a 89 CRX enduro car, recently put the 8 valve head on the 16 valve block. I used my 16 valve intake and injectors. PROBLEM, if you read 8 valve on 16 valve engine thread you know the whole story. Rev's to about 4900 rpms and then the engine bogs down, like it is under a load...

Hey guys. I have a 1990 CRX that I use as an enduro car. I used it all last season and it dominated so this year they changed the rules. NO 16 valve engines are allowed so im screwed. I have alot of $$ invested in the roll cage, etc. The car was a DPI converted to a MPI. PUT THE 8...

OK, I read that the overall ratios are different, 3.88 to 4.25 for the SI. But I only use the car for circle track racing and I am only using 1st 2nd and 3rd gear. I notice that there is a difference in the third gear ratio, 1.864 for the DX and 1.894 for the SI. What is this going to do to...

;) Ok I was doing the DX 1.5 DPI to SI 1.6 MPI swap on my CRX and I figured I would just put in a stock 1.6 engine first before I upgrade to something bigger. Well I bought this engine from a guy and dropped it in. Got it running only to find it had a knock!!!! Anyways I traced it to the...

Got the engine all in and wired up and she just won't fire. Did the old put the spark plug on the valve cover test and no spark. :unsure: ECU throws code 8 TDC sensor, so I am going to go and look at that now. :huh: If anyone has any other ideas or know what could throw off the TDC...

wiring up the dx to si when I noticed that there is a sensor of some sort on the back and towards the bottom of the intake manifold with two wires blue/black and black and a plug comming off of it. The plug won't fit anything and I can't find any information on it. It looks like it measures...

Got a 1997 EX d16y8 and it needs a tranny, slipping out of second gear. I also know a guy who has got a tranny out of a 1995 EX d16z6 cheap. I am sure it will bolt up but are there any other problems I am going to run into with speedo sensor, starter holes/flywheel, mounts, or anything...

Stupid Question off a 1991 CRX D16a6 Anyone know why cut off injector plug-ins from a D series DOHC would not plug into a D series SOHC injector?? I bought an engine from a guy and he threw on some fuel rail from a??? which did not fit even close so I found a rail and cut off fuel injector...

Anyone have a PM6 ECU laying around for a crx d16a6, preferrably from 90-91??? Looking to spend around $40 plus shipping. Also anyone with a STOCK/ store bought clutch for a crx si d16a6 . Looking for a stock clutch that may even be slightly used cheap. Anyone from WISCONSIN have...

I have a d16a6 out of a 90 SI CRX. Need a fuel rail, mine is missing. Found one off a 89 DOHC B16 and as far as I can remember think they are the same, since the intake manifolds are made with in the same style. Compared a picture of a SOHC fuel rail from a 91 CRX SI to the picture of the 89...

:D OK here's how it is......... Have a CRX DX. Have the SI d16a6 engine but am looking for an ecu... and a clutch too, but lets focus on the ecu. I plan to try and get the most out of this little engine as far as horse mainly. (I am not doing a dohc swap anytime soon). I have tried to...

I am looking to buy an CRX SI engine and tranny from a guy. He also said he would give me an extra DX engine he had around. How do I know the tranny is from the SI and not the DX. The only real difference between the two are gears. I am looking into serial numbers or any numbers stamped on...

I have a 90 CRX DX, looking for an SI engine, miles don't matter too much as long as compression is good. Also need a manual tranny to go with it. Also ecu and wiring, looking for a good deal since there are so many out there. LOOKING IN WISCONSIN unless you want to ship it to me cheap. ;)...

Stay with me here. First off you ask why would I want to put a d16y8 into a CRX?? :huh: Why not bigger huh??? Well you see this is going to be a race car, no not a see how fast I can get my car to go, but a car to race in a 4 cyl SOHC stock class. I live in WI where is is very hard to find a...