91accordwithwork
kid that everyone loves!
coul di boost my stock f22a1 motor
i only wana run like 2-4 pounds but tell me what u think i really have no idea>?
i only wana run like 2-4 pounds but tell me what u think i really have no idea>?
We may earn a small commission from affiliate links and paid advertisements. Terms
Its very possible.
As for doing it,
Well.............................
You will need
-to weld a flange on the exhaust to mount the turbo
-find a way to mate it to your down pipe
-set up vac lines to the wastegate to regulate boost
-run oil and coolant lines to the turbo
-drill a hole in the block for the oil return line.
coul di boost my stock f22a1 motor
i only wana run like 2-4 pounds but tell me what u think i really have no idea>?
why would you weld a flange onto the exhaust when you can buy a turbo manifold? much easier and less work. and what would you possibly have to drill a hole in the block for?
oil return line for the turbo, but apparently you can get a pan with that already. I keep forgetting about the massive amounts of aftermarket goodies available for hondas.
my mistake
Its very possible.
As for doing it,
Well.............................
You will need
-to weld a flange on the exhaust to mount the turbo
-find a way to mate it to your down pipe
-set up vac lines to the wastegate to regulate boost
-run oil and coolant lines to the turbo
-drill a hole in the block for the oil return line
At 2 pounds I would expect somewhere between 8 and 16 gained horsepower. You can do more than 2 pounds, but I would't go any further than 4
My opinion is if you're gonna do all that, you might as well throw in some forged rods and pistons, better valves, and go for 10. But at that point you might start having tranny issues.
Basically turboing is very feasible, but there's alot to consider.