Search results for query: *

go these from a friend for $200, cant find any place to see if they are real or not, they will still look nice cleaned up. they do say HART in the center on the inside and made in japan.

finally got a car I like. got it for 2K because it had this clutch in it. and my pile of EF

as stated I am going to attempt to put my B18 swap into an 89 civic Si, when I removed the A6 out of the civic, I noticed there is a different plug on the back of the intake manifold I have never seen before, 1 blue wire and 1 black/yellow, and a big vacuum hose. I am wondering if I can use my...

ok I traded my stereo for a 90 hatch shell, and the ecu plugs look like this I tried a chassis harness I pulled out of an 88 crx I scrapped, but a bunch of the plugs are different, there is an 90 EX in the u-pull-it right by me but it is an auto, how much different is the auto chassis...

when ya gotta...

alright, so we are going to attempt the auto to manual swap in DA integra. I got alot riding on this because I could end up with a crx Si. what we have. B18B ls engine w/B16 cable trans B-series shift linkage from the crx PR4 ecu passenger side manual mount automatic 93 integra i looked...

1990 civic lx shell on steelies clean interior, tiny rust spots, cleaner than most MN cars, even newer ones. brembo front rotors, neuspeed springs, magnaflow exhaust, new plates/tabs needs engine harness. cracked windshield 1500 or best cash offer 763-447-8142 felix

:( anyway, my car wont start. my cel is solid on wtf, wont blink if I jump it either P28 switched ECU's, nope, not it. fuel pump not humming when I turn the key, theres more than 2 wires going to it, which two will jump it? checked ECU codes and am stumped and ready to get out the torch and...

looking to do a trade for a B16 swap in a kinda crappy shell that I can practice welding on. and I dont want the rust to eat my car, I worked too hard on it to watch it die slowly of cancer. 1990 lx 4 door 5 spd crx Si trans. new clutch cable, newer cx clutch that will slip if you shift too...

..., not because he hasn't helped me, he has. anyway I replaced my clutch cable yesterday, car shifts like new now. the clutch felt wasted, now works as normal as a cx clutch on a Z6 can. then my dad "do you know why your clutch cable stretches?" "no" "it's because your grounds are going bad...

I am replacing the clutch in my civic, it has been slipping like crazy and I have to adjust it almost weekly. I bought a pepboys replacement for a 1991 crx Si. I just put a new clutch in this summer for a civic CX. (it was used to move the car a few times, then I bought a whole new swap)...

I just bought a 91 jetta for a winter beater, I need to do a couple things to it before I can confidently park my civic for the winter. does anybody know if there is a forum like this one for vw's? or has anybody adjusted the shift linkage on a jetta/golf? I am having a really hard time...

I have a 90 LX at the moment and have come across a good deal on a DOHC ZC(or the USDM integra version I'm not quite sure yet) my questions are I have my car hardwired for an OBD1 distributor, and want to know if I can use an OBD0 ECU with that. I have a PM7 90Si ECU but to use the OBD1 I had...

ok, I realize this sounds dumb as hell, but after I r&r'd my engine to replace a busted tranny, the car started once. now the battery light is on and the starter clicks, car wont start. 13.7 V @ the battery and at the starter + it push started but hiccuped at low rpm, I drove for a while the...

I realize that here in MN it's really hard to find a clean EF civic of any particular shape, but I got one that came from NC. after a marathon of engine pulling and installing, re-wiring the bullshit that some people call a swap, I got it running and looking somewhat decent. my speedometer...

#1. I have a GSR cluster in my 90 lx (I HATE it when people dont solder their connections, and use speaker wires, and all the same color wires, and...), and I cant make my speedometer work, I have the electric VSS in the tranny, but need to know how to connect it to the cluster. also the power...

ok, so the car I have now is a 90 LX, it has been converted to a gsr cluster. had a B16 in it and the elec. speed sensor. after probably ruining my tranny getting the speedometer cable out of it (I haven't found the gear off it yet) I found I still cant make the 94 del sol sensor fit into the...

ok, so I believed the person I traded shells with when he said OBD2 injector clips will fit OBD1 injectors. silly me. it is a 90 civic lx that ran fine with his SiRII swap in it, guages converted to GSR cluster w/ elec speed sensor. and has a conversion harness to OBD1. at some point I was...

I need to know if a crx Si trans (input shaft/starter) will work with the clutch and flywheel on my D16Z6 from my del sol, I might have my shell traded and am hoping I wont need to purchase a new clutch. I also have a CX flywheel with a brand new clutch, if that will work, I heard the cx...

have a 1994 del-sol and two kids, facing divorce so want a backseat so both kids can visit. the car runs fabulous right now, sounds great with a full flowmaster catback (fits better now since pic), lowered, new rear shocks, megan rear LCA's, carbing tie bar, front strut bar, super clean...