Search results for query: *

Ok so I got my H22A running in my 96 accord after fixing a couple wiring problems that I had. It has been a while since I looked up the stuff for "fit and finish" on this swap so I figured I would ask some people who have done it. First off these questions are for people who have direct...

Ok people obviously I am having trouble getting my car going so im upset I havent thought of asking this before. How do I pull codes on my car? I know how to do it on OBD1 accords but is there a spot to jump to be able to pull codes if the car is OBD2 with the OBD1 ecu? I dont have a comp to...

Hey people I need some help with my engine swap. I am almost finished and here is what I have done so far. With the f22 out of the car I installed and made all the required modifacations to the accord harness and fixed it to my H22, I also got the vtec sub harness and OBD2 to OBD1 conversion...

This ? applies to any ECU but mine is a P72(s300). All I want to know is if I hook nothing up but the 2 power wires and the 4 ground wires can I power up the ECU to plug up the s300 to my laptop. any help is greatly appreciated.

Hey people im trying to figure out y my car wont start. I have no spark, I ordered a p72 with the hondata s300 already installed so I could try to get a readout and see whats going on, plus its a nice upgrade. So heres my problem. With the new ecu I cant connect to my laptop to see any of the...

Hey people simple question. I put an h22a bb4 into my 1996 accord lx sedan. I want to upgrade the exhaust from the headers back. Is there any kits that will fit my stock hangers or am I better off getting the headers, cat and muffler and getting it custom installed. Thanks for any help.

Hey im looking for a known good p13 ecu for my swap. I think i have a bad ecu so I would like a good one to compare it with. please pm me with any you have.

Ok I have a 96 accord with a 93 h22 with a P13jdm ecu. The motor is fully in the car and it wont start. I have fuel and compression but no spark. So I have done some serious electrical testing to make sure all my wiring is good. It is but I would like someone to check my specs if you could as I...

Does a 1993 jdm p13 have an immobilizer? Is there anything that will make it not spark with everything else working fine? I just thought of this and I dont know if it has one. any help is greatly appreciated.

Hey people I have heard that people have had issues getting spark with thier p13 after putting an h22abb4 into an accord. I have this same problem. I have read that one fix is to change to a p28 ecu. This goes to a civic si doesnt it? Will it work for a h22? This is really depressing I cant...

Hey people here is whats going on. I have a 96 accord lx that i put a jdm h22a bb4 in. Everything is in run where it should be but the car wont start. It turns over fine and im getting fuel but no spark. There is a new dizzy on(this is the internal coil jdm one) I have tested all of the wiring...

Hey peeps I got everything for my swap completed and in the car except the dizzy. Everything would turn over fine got fuel and everything but no spark. I checked all my grounds and found that my primary coil will charge but not fire. I am suspecting the ICM inside the dizzy. I want to change the...

Hey people I am working on a friends car that he did a swap on. This thing will crank and turn over fine but it does not have any spark. I think the distributor is the problem. Is the ignition coil inside the dis on the JDM motor or is it external. I have read that some are internal and I cant...

Im taking this off because I wrote it very late and poorly. I will be editing the entire swap with pictures. Its ALIVE and nice :)

Hey people im getting ready to build a motor for my car and I was thinking about doing a build that I read about a while back. In this build the block, crank, rods, pistons most of the bottom end come from a K24 from a crv. Then you take the heads, head gasket, timing belt, accesories and oil...

Hey does anyone have an ECU pinout diagram for the 96 accord LX. I found it for the H22A if anyone is interested I just need the corresponding information for the accord. All help is greatly appreciated. OBDI 93-95 H22a Layout A1->A25--B1->B15--Blank--D1->D21...

Hey people getting ready to start the swap. I have the ecu, harness everthing from the h22 and the old motor will be out of my accord tomorrow night. I am going to put my accord harness on the h22 hook up sensor and extend wires. I have to add the vtec part of the harness and knock sensors, then...

Hey just checking to see if anyone knows what this computer came out of. here is the code. "37820-p13-n01 552 j-mt" any help is greatly appreciated. Thanks

Hey people I am going to need all the help i can get. First off I am an experienced professional mechanic and I will be doing this swap with a very good friend who is also a master mechanic, but we dont work on honda's. My accord has transmission problems so I bought a complete H22 from a 96...