Search results for query: *

i have a 2000 si b16a2 block has 30,600 miles since new just recently had oem jdm ctr pistons and rings installed 2k miles ago was dynoed at 170 at the wheels with b16 head ctr cams and itr dual valve springs going to a 2.0L. located in spokane $400. willing to ship shipping should be around...

I have a JDM ITR DC5 gauge cluster for sale. Cluster is in mint condition. also comes with plugs and about 8" of wiring incase you wanna try to swap it into something besides an RSX $200 obo will post pics soon

have a newer prelude center console. black good cond. make offer obd1 p13 vtec h22 ecu MT make offer Map sensor make offer

so my radiator fan was working then i took the swap out to build it put it all back in and it didnt work. I ran power and ground to it and it turned on so i thought it might be the temp sensor so i bought a spoon one and swaped it and still nothing. Any ideas? the car only overheats when i am...

I have a 98 EX D16y8 i am parting out due to spun bearing. so i Have a- *SOLD* complete y8 head with dizzy, vtec solenoid, all sensors, etc complete *SOLD* complete y8 intake manifold with TB all sensors fuel rail and injectors *SOLD* y8 5 spd tranny shifts perfect no grinds STILL...

my buddy has a b17 block sitting at his house and i am tearing down my b16 and i was thinking about throwing in the 1.7 rods and crank with my ctr pistons will this set up work with the ctr pistons and will it change my compression from when it was a 1.6 and will i have any clearance issues with...

ok, so i just built my usdm 00 si b16a2 engine and got it in and running and it smokes a bit just like the white smoke n the morning when your car is cold but never stops gets a little worse in vtec but not bad. i didnt think anything of it at first cuz its freezing here and just thought it was...

my g/f's 98ex motor took a crap on her and so im puting my old y8 in . hers is an auto and mine is a 5spd so i gotta swap the trannys but i noticed that her intake mani and tb are different than mine. she has a sensor under her tb that i dont have and i have a sensor behind my intake mani that...

I have two ecu's up for sale. USDM obd2A p30 (96-98 civics and other applications) $130 obd2a p73 ecu. $175 SOLD both are virgin and in mint condition. i have used both and both are fully operational.

I have a full h22 swap with everything you need. the swap mounts are for an eg civic i think they work for a dc integra also. it also comes with a dc header, aem fuel presure regulator and aem fuel rail, shifter cables, shifter assembly, ecu swap axels, 5 spd tranny and ecu. it has about 45k on...

I have a used fal fan for a 92-00 civic works great a little dirty but looks good. $100 shipped to the lower 48 states.

My car wont start it just cranks. i checked the fuel and its getting presure at the hose by the filter and i checked for spark and it was really weak. I tried replacing the distributor coil and it didnt fix it, i tryed replacing the ignition control module and it didnt fix it. what else could it...

i have an obd 1 h22a swap for sale it comes with everything you need to put in a 92-95 civic. engine, tranny, swap mounts, shifter cables, shifter assmb., axles, ecu etc. also has a dc header, aem fuel rail and fuel presure regulator. the motor runs strong. *NEW PRICE* $1700 *NEW PRICE* plus...

im putting a skunk 2 pro intake manifold on a 2000 civic si and i tapped the hole on the #2 runner for the one hose like it says in the instructions but on the back of the manifold the coolant fitting on my stock manifold has only one stem and on the skunk mani it has two what do i do?? skunk...

I am in the process of building my motor and when reassembling it i noticed that one of the three caps that go over the cams is missing now. Honda says its not a part I can order unless i purchase the whole cylinder head. and so i called this engine place in town and they said if i did find one...

I need a peice off a b16 cylinder head not sure if gsr is the same but I need a cam cap out of the three middle caps I have the one that says 3 and one that says 3-4 so the one i need has probably got a 2 on it. here is the picture of what i need. If anyone has one get ahold of me i need it...

I have a full JDM H22a swap for sale. it is a complete swap with engine, H23 tranny, swap mounts, axles, ecu, shifter assembley, shift cables. etc. also has a dc header and an aem fuel rail and fuel regulator i will include as well. the only thing missing is an egr valve which is easy to find...

need a non abs prop valve for a 97 civic with rear disc conv. please pm or email me if you have one for sale. thanks hondapowerb16a2@hotmail.com

had a few questions about building a b16a. im doing ctr pistons and ctr or skunk2 stg 1 cams. if i go with the ctr cams i heard you can switch the b16a intake valve springs to the exhaust and and do itr intake springs on the intake. does this work well or is it kinda ghetto? also can i use my...

ive got a b16a2 with 21,000 miles on it and id like to get a bit more power n/a with some ctr pistons and some better cams. my question is, since it has low miles do i need to have any machine work done to the cylinder walls before putting in the new ctr pistons? also, if i stay the same size...