Taco15
I wear stretchy pants
LMK if you run into problems. I can pull engine harness drawings and find out for sure.
ok I need you
could you get me a diagram or pinout of the 3 harness plugs for a obd0?
1 round
1 rectangle
1 small square.
We may earn a small commission from affiliate links and paid advertisements. Terms
LMK if you run into problems. I can pull engine harness drawings and find out for sure.
ok I need you
could you get me a diagram or pinout of the 3 harness plugs for a obd0?
1 round
1 rectangle
1 small square.
Have you checked with a multimeter to see that signal is raching the injector? OBD1 are without resistors, I think only OBD0 use the resistors.
That is correct, only OBD0 require the resistor box. OBD1 does not. The OBD1 injectors are high impedance and don't require resistors. So, OBD1 injectors wired with resistors could be the problem and probably is. The resistors could drop enough of the current to prevent the injectors from functioning.Have you checked with a multimeter to see that signal is raching the injector? OBD1 are without resistors, I think only OBD0 use the resistors.