Search results for query: *

All off of a 95 B18b1 w/ approx 60k miles stock flywheel - great condition $30+shipping clutch w/ 60k - $30+shipping A/C compressor - $30+shipping email BDogggUT34@hotmail.com or PM me if interested , this is the last of the extra swap parts i have to get rid of

I have been idling about 300-400 rpms and havent been able to adjust it by the screw. Thing is, the engine is a 95 B18b but has a newer B18/B20 valve cover on it with a PCV valve hole. I have put a PCV valve in there but the other end of the hose is just floating because i noticed on the stock...

I had the A/C removed when the swap went in but now that i'm looking at some other swaps i see that the entire bracket has been removed including the rubber mount. Is the mount needed at the location i'm trying to show below: Bracket Pic does this affect stability or anything if removed...

Just had the 95 B18b dropped into my hatch. So i have some various parts i'm looking to get rid of if anyone wants them. I have pics and can obviously get pics of stuff if needed. D16Z6 w/ 238,111 on it , tranny is no good (has a quarter sized hole in the bottom, never started it up when i...

Once my 95 B18b1 swap gets finished up i'll have I/H/E. I read in a magazine that these mods cause the motor to run lean. My question is, at the point i'm at do i NEED a fuel pressure regulator? Does the motor run lean enough to hurt the motor? Now that this has come to my attention i've...

Can anyone provide the steps to remove the P/S and A/C and if anything needs to be changed after removing these? Looking for tech articles or people with experience doing this. thanks engine is a B18b going into a 92 Si hatch. i'm thinking about keeping the P/S but definitely removing the A/C.

I am currently installing a 95 B18b LS motor into my 92 Hatch. I am wanting the Apexi N1 full catback but will the one specifically for the 92-95 hatches bolt up to the stock downpipe of the LS motor or will there be fitment or length issues because of the different motor?

Does anyone have any pics of an APexi WS exhaust on an EG hatch? I'm tryin to choose between the N1 and WS exhaust right now for an LS engine. For those who have experience, i was thinking the WS because of the midrange gains over the N1 which is supposed to have high rpm gains. Either way i...

For a 95 LS engine into a 92 hatch, will an AEM short ram for the Integra 94-01 fit alright in the engine bay or do i need to get the AEM short ram for a 92-95 Civic for it to fit right?

i want to use a Skunk2 Short Shifter in my 92 Si Hatch when installing the B18b i recently picked up. Do i get the one for the 92-95 civic or the Integra one or are they both the exact same thing?

finally hooked up a 95 B18b with 60,000 miles on it. Going into a 92 Si hatchback. What cam/valve/retainer combo is common with this engine? My plan right now since the motor is out to do a little buildup. Going turbo within a year so the combo needs to be turbo compatible. I'm also looking...

what have been typical HP at the wheel numbers using this kit on an LS motor?? Also for people with experience any 1/4 times? Could you please list any extra parts you have if you have stuff other than what is included in the kit?? They are on sale right now and i'm thinking about picking one...

ok, i've called both sohfast.com and homotorsonline.com and from reading on this website both are very hight reputable companies. Heres the situation, both offer 94-95 OBDI LS motors at almost the exact same price, however sohfast.com has usdm motors and they said they average about 90,000...

What concerns need to be taken into consideration when swapping a JDM B18c into a 92 Hatch Si rather than a USDM B18c?? I thought i read somewhere that some wiring has to be done because plugs dont fit?? Would it be easier to get a USDM motor instead??? Any opinions or suggestions would be great

need an LS tranny for a 2000 engine. Must be good condition and no grinds

Here are my choices at this point, these prices are completely installed and running prices. $4300 for ls/vtec (2000 LS block and B16 head) or $2500 installed for the complete 2000 LS engine. I'm tryin to decide on whether it is worth the extra money for the ls/vtec or just spend the extra...

What are the main advantages/disadvantages to cable and hydraulic trannys?? I have someone selling an OBDII B16 out of a Del Sol and he says it has a cable tranny. From researching i've found that they are supposed to be hydraulic. Should i be watching out for anything or is the cable tranny a...

I'm looking for the wiring harnesses and bulb sockets for the rear tallights on a 92 hatchback. Anyone know a place online to get them?? I've been searching google but no luck so far. Or how easy do you think it would be to make them??

when i bought my civic the window bracket was broken along with the clips that attach the window to the bracket. I have now fixed the bracket but cannot find any clips??! Anyone know where i can get them online or a site??

I'm looking at the Tenzo R seats on Ebay for $399 for the pair. Just wondering how the quality of these seats are? The look good to me but i want them to last. Also how are they compared to the higher end Recaros and Sparcos?? What is really the difference? also if anyone has any pics of...