Search results for query: *

I pulled the head on my B16, and there is ALOT of carbon build-up on my exhaust valves due to inadaquate PVC system because of my turbo. I was wondering if anyone knew of a quick way to remove the carbon build up from valves. I've used everything from Simple Green, WD-40, engine degreaser...

I'm trying to get my speedometer on my 93 integra to work right... I replaced the speedometer cable with a brand new one from Acura, and put a different VSS from a vehicle that I know it worked on. My odometer and trip meter is moving like normal, but the speedometer jumps around like...

My speedometer on my 93 Integra GS is not working. I already replaced the speedometer cable, but still it doesn't work. I'm convinced the VSS is bad, and I got a hook up at an Acura dealership, but the guy wants me to find the part number. I googled it, but can't find anything. I checked on...

I am not sure why, but for some reason my clock in my 93 Integra just keeps counting. It will say "9:55" "9:56" "9:57" "9:58" "9:59", then start back at "9:00", all with in about a minute. I bought the car like this, and was wondering if anyone has had this problem or might now why it's doing...

I just bought a '93 integra with a '94 GSR motor in it, with a '94 P72 ecu. I am trying to clear the check engine lights but one in peticular is stumping me... I got a code for the VSS. The tranny is a YS1 cable tranny and the VSS is hooked straight up to a cable to the speedometer. (I think...

Almost finished swapping a JDM H22 into a 95 Accord, but have run into a couple of questions... The stock F22 has an external coil while the JDM H22 has an internal. I have a JDM P13 ECU. My question is, how do I wire this up? The plugs on the the JDM distributor match up to the Accord's...

Okay, I got a 93 civic hatch CX with a B16A turbo. I've been having this problem for about 4 months now and can not figure out why. When I try to start my car, sometimes it fires right up. I get in, put the key in the ignition, turn until I hear the fuel pump come on, and start the car. Other...

Im building a B20B with a B16A2 head. I'm finished except for that black box that goes on the back of the block. On the B16, there's a hole in the block that this box fits into, but on the B20, there's no such hole, or mounting places. Anyone that's done this, can you let me know what you've...

I have a 93 civic hatch with a JDM B16A swap. Just recently, within the past 2 weeks, my car has started to overheat. The gauge climbs up to about 3/4 high, and will go back down eventually. Sometimes downshifting helps. It does it everytime I drive longer than 5 minutes, but not so much at...

I have a 93 civic hatch with a JDM B16A swap. Just recently, within the past 2 weeks, my car has started to overheat. The gauge climbs up to about 3/4 high, and will go back down eventually. Sometimes downshifting helps. It does it everytime I drive longer than 5 minutes, but not so much at...

I'm installing my drag turbo kit, and it suggests 20W50 oil... Is that right? What weight of oil do you guy's use? In my car now is, 5W30 full synthetic. Will that still work? BTW, it's a JDM B16A w/ a T3/T04 turbo at 8lbs. of boost. Thanks for your help!

A friend of mine is building an LS Vtec motor using a B18B block, with stock crank, rods and pistons with a B16A2 head. I was told that he couldn't use the PR4 pistons because the valve relieve's are not deep enough and the valves would hit the pistons... Is that true. This guy is kinda on a...

I have a 93 Civic hatch with a JDM B16A (10.4:1 cr) swap. I ordered a turbo kit from Drag Turbo Kits with a T3/T4 turbo and 7lb wastegate spring. I was going to order the RC 310cc injectors with the kit, but everyone I talked to said that they were too small. I had to atleast get 440cc's. What...

I just got my Momo steering wheel and hub in yesterday, and want to install it. My question is: do you need a steering wheel tool to remove my stock steering wheel? You know the one that kinda looks like a big chicken foot? My "Haynes" doesn't say you do, but you know Haynes manuals suck...

I was thinking about relocating my Buddy Club battery behind my glove box. My question is: Will it get too hot? Will it let off any fume's into the car? Thanks for everyone's help!

I am planning on replacing my intake manifold and throttle body. Right now I have the stock P30 manifold on my B16A. Is a Type-R mani that much better than the P30 or should I go with the Skunk-2? Is there a better one that anyone has experience with? Right now I'm all motor but plan to go turbo...

I was driving my car earlier today and noticed my temp guage fluxuating. Going up and down slowly. I thought maybe it had something to do with my Mugen radiator cap so I changed it back to my stock one. Seemed better, but then it started doing it again. Could it be because I'm still running the...

I recently purchased a JDM guage cluster for my 93 hatch. I put it in yesterday, and noticed that two plugs that were present on the USDM cluster were not on the JDM one. I hooked up the other two larger ones and started my car. The tach, speedo, temp, and fuel guages work, but my turn signals...

I'm thinking about ordering the JDM rear disc conversion from the 92-95 civic Sir. (which comes with the proportioning valve) :) I was wondering if the rotors and the pads are the same as the 92-95 civic Si, so when I replace 'em, I'll know what to get. Also, I want to get an Integra GSR or...

I did a search about wheel offsets and even read up on the "tirerack" tech for offsets. I understand what offset is, but still not sure which offset to go with when I order my new wheels. Currently I have 99-00 Si wheels with 195/50/R15 tires on them, and have no rubbing. I want to use my same...