its time for me to change my head gasket and i need to know what head bolts to get? and what throttle body gasket to get? i have a jdm b16/pr3 so can i get 00 civic si bolts and gasket? thanks for any replies..reason im asking about the throttle body gasket is cuz my old one is tore up and i...
after warming up my motor i check the radiator hoses and the upper hose was hot and the lower hose was cold.is that normal?also there was a little steam coming out of the header area.would that be my head gasket?one more thing is there a way you can tell if your water pump is going bad without...
after warming up my car and going around the block i checked my radiator hoses and the upper hose was hot and the lower hose was cold,is that ok?also there was a little steam coming from the header area,would that be my head gasket?
anyone have any tips on installing some side skirts on my crx..i removed all the plastic pieces and ofcourse the kit i got doesnt fit good but i can do some shaving and what not,but my question is mounting it...anyone?
i gotta replace my clutch in my crx on my s1 tranny and i gotta do this job in my garage,i got a couple jacks and a couple jackstands..first is it possible for me to do this job..i think i can but it looks like its gonna be a bigtime job..does anyone have any tips?step by step walkthrough or...
88 crx si=ecu,injectors,im,various sensors for 50 bucks and jdm b16/pr3=im,ac compressor,power steering,wire harness,fuse box,resistor box, give me an offer and ill sell it all whatever you need..you can email me at ob1kinobe77@aol.com
theres a few company's out there that make the front and rear camber kits for crx's(spc/ingalls.etc.)but my question is they say they are for 89-91 crx's,so would those products work on my 88 crx si??
i need to replace my clutch and everything that goes with it in my jdm b16a and i was wondering what would be the best stuff for the money?im looking for balance/reliabilty/long life
i gotta change the head gasket on a jdm b16a.what year/make/model of car do i get head bolts for from the dealership? and is there anything else i should replace while im changing the gasket?
sounds like the same prob as that other guy only mine is a jdm b16a/s1 tranny so its a cable clutch and pushing in the clutch pedal is soft and ez,it seems like nothing is going on in the tranny..also i cant get it into any gear i dont know if thats the place racing shift linkage i got in it or...
i need that bracket from a stock crx 88-91 i guess,that part connected to the tranny by a couple of bolts,it holds the clutch cable straight.anyways i need that part so i can finish my swap,right now theres not enough slack in my cable..maybe someone can tell me an easier way to get that...
heres the situation/jdm b16/pr3/88 crx si.i started it up for the first time today and it sounded way out of tune/lots of vibrations/not much throttle response.so i turned it off after tryin it a couple of times and now im lookin for info..im not sure if i got the vacum lines hooked up right(i...
i got b16/crx/place mounts and stuff and now i cant get my clutch cable to fit i trimmed it all the way at the bottom and still not long enough,when i hook it all up it so tight that the clutch is held open,can some drop some knowledge on this subject please?? o and i have a 91 gsr cable and...
my brother has a 92 civic si and were tryin to put an amp in it...i cant find any holes in the firewall to connect the amp power cord to the battery...can anyone help??
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.