Search results for query: *

I'm going to buy a timing light soon and I was just gonna buy a regular $50-60 one. But know i need a rpm guage, because i sent my TB out to maxbore.com to get it bored out and when i put it back on I'm going to need some kind of rpm gauage so that i can properly set my rpm. So then i saw a...

Ok here it goes, I have 17" Gianelle 5 twin rims with nitto 450 extreme tires on them and i've had them for the last 3 years. And I love those tires, they gripped REALLY GOOD, and they looked sweet. BUT they don't make them anymore. I know there are better ones out there now but my front ones...

Ok, here it goes, I swapped in a b16a into my 98 civic last winter. After 3 days of driving I got the P1457 code(evap system leak charcoall canister area). So I read through my helms book, and I bought the vacuum pump to test the vacuum lines. I tested all my solenoids, and they all click, I...

My review is they are FUCKIN Amazing. I didn't buy them but I made my own custum ones. they look different but they work the same way. I cannot believe the difference, the guy who invented them was a genius. I cannot but into words how GREAT they are I think EVERYONE, EVERYONE should have them...

Hi, I have a 98 civic lx with a JDM 2nd gen B16a in it. And I want to put the Jackson Racing Supercharger on it. The supercharger they sell is for a 99-00 Honda Civic Si. My question is will it bolt up fine to a JDM B16a, LIKE are the mounting holes and brackets gonna line up fine. I know that...

Hi, I have a 98 civic 4dr LX. I did alot of research for the rear disk conversion, and i now for 2dr's, and hb, you use 99-00 civic si e-brake cables. The question is do i still use the 99-00 civic si cable on my 4dr, or what? If any one has done this conversion on their 4dr can you please...

I did some research on sway bars, to see the cons and pros of them. And i found almost all pros. I thought they were no big deal like strut bars. Since i got my strut bar I felt Alittle difference. but what i'm hearing about sway bars is that they make a HUGE difference. and thats what i want...

Hey guys, I trying to find splitfire spark plug wires for my JDM B16a. I did a search on yahoo, and when i go to the splitfire site they don't give the part number, and when I emailed them they don't email back. I want these wires becuase they came on my buddies JDM 2nd Gen B16a when we bought...

I have a 2nd gen JDM b16a in my 98 lx, and when I check my oil it always seems like i'm losing some ( not major) , so I did a compression test ( even thought the place I bought it from said they did one already) So my results are like this: Cyl #1 = 195 Cyl #2 = 200 Cyl #3 = 200 Cyl #4...

Ok, Over the winter I swapped in a JDM 2nd gen B16a into my 98 LX, and I used the civic si ecu. Well It runs great but I got a check engine light. So I bought the OBD2 scanner, becasue at first I thought it was the code 9. But it was 90 or P1457, emission canister area leak.. But before I did...

Hey, i just swapped a JDM 2nd gen B16a into my 98 civic lx, and when vtec kicks in its an amazing feeling, you can feel and hear the vtec screaming. . And I was just wondering, because I've never driven in a newer Si or RSX what vtec feels like in the K-series motors. I'm guessing its the...

Ok, the OBD2a ecu is in the 96-98 Hondas, and Acuras, and the 99-01 Hondas/acuras have OBD2b, my question is can I use a 00-01 ITR engine harness with a P2T (99-00 civic si) ecu???

I want to make my JDM b16a2, a OBD2 engine, I could just change the injector plugs, but I want to now can I use the Injectors off a D16y8? I now that the d-series and the b-series flow the same amount of fuel (240cc) so they should fit shouldn't they?

Ok just got back from picking up my JDM B16a2 from toronto and I was told before at different forums that i can keep the A/C bracket that came with the engine and that my A/C compressor will bolt up in my 98 LX, BUT it doesn't!! What bracket do I need, i don't want to buy a 99-00 USDM Si bracket...

Ok, we don't have emissions here in NY but, i'm swapping in a JDM b16a2 into my 98 civic and I heard that the JDM engines don't pass emissions???? Does it not pass emissions because the JDM b16a2 is OBD1 or is it the engine that doesn't pass. Becuase if I swapped in a USDM B16a2 then I would...

Ok, I did alot of research, and I keep getting different results. I have a friend that has a 2000 Sir, from canada. And he might be selling his engine, and I might buy it. but I just want to clear somethng up. So far I now that the JDM 92-95 civic has the B16a2 Sir, with 170hp and 10.4:1...

ok i swapped in a vtec head into my 98 civic a month ago and everything was fine, but now i got a check engine light and the code was 45, which is "to lean or to rich", so i bought a Air/fuel gauage , then hooked it up and it was all the way to lean, then i took out my spark plugs, and they...

ok i just installed my d16y8 head in my 98 lx and wired the vtec solenoid to the rpm switch and it works the vtec doeskick in but. I think my timing is off becasue , my car is really slow in the low rpms, like if i start off in first gear i have to start at 3k rpm becuase if i start any lower...

Ok me and my friend just swapped a b16a into a crx si, we built the engine over the winter, we put it back together and itsatrted right up with a litle vacuum problems, but they are already taken care of. know we wired the vtec solenoid to pin A8, vtec oil pressure to B5, and knock to B19, the...

I'm doing a head swap on my 98 lx, i got the head and i purchased a ex d16y8 ecu, i now i have to hook up the vtec solenoid ( i believe its pin A8, correct me if i'm wrong), but i was told many different things , some people say its just the vtec i have to hook up and other people say i have to...