Search results for query: *

Whats the best way to adjust the camber on a lowered 89 Civic ? Adjustable upper arm anchor bolts or adjustable upper ball joints. Best brand of each please. 10K miles after B16 swap and 1"lowering the front tires are bald on the inside 2".

The Y1 LSD trans on my JDM B16 from a 1990 SIR has a bearing making noise. It's believe it's either the Input shaft bearing or one of the other main or countershaft bearings cause it is grinding any time the clutch is engaged weather in gear or not. My question is what I use for replacement...

OK guys..Who has a GOOD method for making the larger B16 Top radiator hose fit the smaller 89 Si radiator inlet. I slipped 2 layers of innertube over the inlet to shim it up but I'm not very happy with that even though it doesn't leak. <_< Pappy

Got a B16 Swap thats losing a little coolant all the time. There are no visable leaks of any kind. The compression is exc., high and the same on all cylinders. No coolant inside the car and no smell so I do'nt think its the heater core. The bottom plate on the EVAC is rusty and Maybe shows a...

Here are all the parts I used for my OBD0 B16 swap into a 89 Civic Si... Some are from 90-91 Teg and some are from 94 Del Sol Vtec DOHC.... Use the Honda Part Number anywhere it's included, It's the best way to order from Dealer. Hope this will help someone. :D Pappy --Honda Motors...

The AC wasn't working when I did my B16 Swap so I never finished the AC installation. I hate to buy Hasports $200 bracket for my 89 Si compressor and then find out it's no good.. What compressor fits the 90 JDM SiR B16? My guess is the 90-91 Teg. since so much of the Civic SiR was from the...

I have an 89 Si engine & trans (D16A6 1.6L SOHC) pulled for B16Swap. 195K on motor,well maintained and runs perfect with 1/4 qt oil burn in 2000 mi. Has 70k on professionally rebuilt Transmission and Clutch. Altenator=30k, WITH ECU, Exhaust Manifold, Short Cold air intake, shift linkage, axels...

Ok, I've finished my sons 89 Si/B16 swap and I like it so much I want one too. I have the chance to buy an 88 civic and an 88 CRX.. I forgot much of what i've seen about the differance between these and the 89's. Any GOOD info would be a big help. :roll:

Finished the B16 swap into my sons 89 Si..I love it...might not give it back :P ...Anyway...he is going to have to drive back and forth from Minnesota to texas several time before he gets out of the Army and I want to install cruise control. JC Whittney has aftermaket unit for $169 which I may...

Has anyone ever had any luck repairing a split seam on an outer CV boot? I just added up the price from Acura to replace all the boots on my Hybrid Civic axels and it is going to be $112 in parts. :(

A friend just finished his B16 swap into a EG (94) Civic. He used the SiRII motor which I believe has the P30 ECU.. Started and ran great but he has a code 12 on the check engine light, which my book says is for the EGR.....neither this motor nor the stock motor HAS a EGR ...Sooooo, what gives??

New prob.. Installed the B16 and LSD trans. Everything cool until I tried to rotate the tires while installing them. Feels like the brakes are draggin real bad, (they arn't) so I can just turn the wheel if I use Mucho muscle power.. Smooth, just VERY much drag.. Like you can't really even move...

I am installing a SiR B16 with LSD cable trans into an '89 civic SI. JDM engine came with electric VVS sender mounted on trans. Removed sender and now am looking at an adapter bolted on the trans with 1 bolt. Cable from 89 SI requires a different adapter for the cable. Can I just unbolt and...

There is a small diaphram on the end of the fuel pipe on my JDM B16 SiR engine that is part of the nut which fastens the fuel supply hose to the fuel pipe. The parts book lists it as a "Damper Assembly,Pulsation". Apparently, it dampens the pressure pulsations from the fuel pump. When I removed...

Just bought a JDM B16 SiR motor. checked the clyinders with a compression gauge.They are all at 235psi to 240 psi !! what the h#$%..... did it again with same result. checked gauge on another engine..gauge OK.. The pressure specs on this motor are 185 psi new I think. What gives? We used to...

I am swapping a B16 From a JDM SiR with PW0 ECU into a 89 Si. Thsi ECU requires 2 O2 sensors in order to run in closed loop correctly(See HONDATA TECH ARTICLE) I want to run a DC Sports Header which has only 1 Sensor bung in the collector. Where should the sensors be installed? Maybe try to...

My son has headed to Iraq (Major Bummer) and I am going to do an engine swap in his 89 Civic Si Hatchback. I have just about decided on the JDM B16 Civic SiR engine and cable trans and I would like some input on who a good supplier might be. I am looking at Nippon Motors and Inline Four right...